- Početna
- Pro audio
- Mikrofoni za snimanja
- Deity S-MIC 2 Shotgun Microphone Location Kit
Deity S-MIC 2 Shotgun Microphone Location Kit
by DeityThe new S-Mic 2 has remarkably ultra low off-axis coloration. You have nothing to worry about if an audio source moves slightly in and out of axis of the S-Mic 2. Having to boom between multiple actors? Even a novice boom operator can pick up rich full sounds on a film set with this shotgun microphone.
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
Deity S-Mic 2 Microphone
3/8″ Mic Clip
Foam Wind Screen
Hard Waterproof Case
Deity Fur Wind Shield
Rycote Pistol Grip Shock Mount For Boom Poles
The S-Mic 2 Shotgun Microphone and Location Kit from Deity Microphones includes the S-Mic 2 supercardioid shotgun microphone with foam windscreen, a mic stand clip with a threaded 3/8" mount, a Rycote pistol grip shockmount, a waterproof hard case with custom-cut foam inserts, and a faux fur windjammer. This kit can be used to capture audio in outdoor/indoor environments and is suitable for video or interview applications.
The S-Mic 2 supercardioid shotgun microphone features a low-noise floor and an all-brass body with a gold-coated PCB (printed circuit board). The PCB is sprayed and coated with a clear epoxy to perform without issues even in the most humid environments. This coating gives the microphone a water resistance level that allows it to work in the rain without being damaged. The microphone is powered with 24 or 48V phantom power and is equipped with a 3-pin XLR output connector.
Ultralow off-axis coloration
Low inherent self-noise
Water resistant and humidity proof
RF-interference proof
24 or 48V phantom powering
XLR output
Polar Pattern: Supercardioid
Maximum SPL: 130dB SPL (@1KHZ,1% THD into 1K)
Frequency Range: 50Hz~20kHz
THD: ≤0.5%
Nominal Impedance: 75Ω
Min. Terminating Impedance: 800Ω
Sensitivity: -32±2dB re 1V/Pa @1kHz
Equivalent Noise Level: 12 dB(A) re. 24dB (CCIR 268-3)
Input Voltage: 24V or 48V phantom power
Current Consumption: 1.5Ma
Temperature Range: -10°C to +70°C
Dimensions: ⌀19 x 250mm
Output: XLR-3M
Pad: None
Low-Cut: None
Microphone Weight: 198g