Početna
Dronovi
Oprema za multirotore
DJI MATRICE 300 PART08 TB60 Intelligent Flight Battery

DJI MATRICE 300 PART08 TB60 Intelligent Flight Battery

by DJI

Dostupnost: Isporuka 14-20 dana

SKU

CP.EN.00000262.01

The TB60 Intelligent Flight Battery is built especially for the DJI M300 RTK drone.

872,75 € 698,20 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

DJI MATRICE 300 PART08 TB60 Intelligent Flight Battery

Opis

The TB60 Intelligent Flight Battery is built especially for the DJI M300 RTK drone.

These high-capacity, hot-swappable units help to give the DJI M300 RTK incredible endurance, keeping it airborne for up to 55 minutes without a payload.

Thanks to the TB60 Intelligent Flight Batteries, the M300 RTK can fly for longer than the M200 Series V2 drones. In fact, this is how much flight time the batteries allow with the following payloads:

Specifikacije

Capacity	5935 mAh
Voltage	52.8 V
Battery Type	LiPo 12S
Energy	274 Wh
Net Weight: Approx.	1.35kg
Operating Temperature	-20°C to 50°C (-4°F to 122°F)
Ideal storage temperature	22°C to 30°C (71.6°F to 86°F)
Charging Temperature	-20°C to 40°C (-4° to 104° F) (When the temperature is lower than 5°C, the self-heating function will be automatically enabled. Charging in a low temperature may shorten the lifetime of the battery)
Charging time:	Using BS60 Intelligent Battery Station: 220V input: 60 minutes (fully charge two TB60 batteries), 30 minutes (charge two TB60 batteries from 20% to 90%) 110V input: 70 minutes (fully charge two TB60 batteries), 40 minutes (charge two TB60 batteries from 20% to 90%)