- Početna
- Video i foto oprema
- Stativi i monopodi
- Sachtler Cine 30 HD
Sachtler Cine 30 HD
by SachtlerSachtler 3006 Cine 30 HD Fluid Head
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Sachtler 3006 Cine 30 HD Fluid Head
- Sideload Plate
- 3 x PX625A Batteries
The Sachtler 3006 Cine 30 HD Fluid Head is a fluid head with a 150mm half ball with integrated flat base that allows you to use this head with a tripod with either a 150mm bowl base or flat base. It features a side-load sliding camera plate mechanism. Unlike traditional sliding baseplates that require you to slide the camerqa plate into the head, the side load mechanism allows you to snap the camera into the head, and still slide the plate foward and back to adjust the balance of the camera on the head. This is especially useful when the camera is weighed down with accessories. It is compatible with Arri and OConnor camera plates, and features a fine adjustment for a tight, secure fit.
The head features two payload ranges, from 6.6 to 66, and 17.6 to 77 pounds selectable. The head features 18 steps of counterbalance, these are selectable via the 9-step setting dial, with the half step lever providing 9 additional steps of counterbalance. Pan and Tilt drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtler's patented leak-proof frictionless cartridges. A tilt safety lock guarantees the integrity of the payload until it is secured, and disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever.
- Side-Loading Rapid Camera Mount
- The Snap&Go side-loading mechanism gets heavy camera packages mounted quickly without compromising safety or sliding range, and is also compatible with Arri and OConnor camera plates
- 18-Step Counterbalance and 7-Step Drag
- for rapid setup and repeatable results
- Payload Range Selector
- Switch between the High and Low ranges with a flip of the front-mounted Payload Range Selector lever
- Illuminated Bubble Level
- The Touch Bubble is a self-illuminated spirit level activated through contact, and is powered by three PX625A batteries
- Assistant's Box Mount (optional)
- Using the optional Front Box Adapter, an assistant's box may attached to the front of the head without impairing the tilt range
- Eyepiece Extension Support Adapter (optional)
- Provides an anchorage point for eyepiece extension rods on the left side of the head
Load Capacity | 6.6 to 77.2 lbs (3 to 35 kg) |
Tripod Mount | 150mm half ball with integrated flat base |
Counter Balance System | 18-Step plus Boost Button |
Quick Release/Wedge Plate | Yes |
Sliding Balance Plate Travel | 5.9" (150 mm) |
Tilt Drag | 7-Step plus zero |
Tilt Range | -75 to +90° |
Tilt Lock | Yes |
Pan Drag | 7-Step plus zero |
Pan Range | 360° |
Pan Lock | Yes |
Leveling Bubble/Illuminated | Yes/Yes |
Temperature Range | -40 to 140°F (-40 to 60°C) |
Height | 8.4" (21.4 cm) |
Weight | 12.3 lb (5.6 kg) |
Packaging Info | |
---|---|
Package Weight | 21.35 lb |
Box Dimensions (LxWxH) | 15.9 x 15.9 x 15.7" |
- NovoDZOFilm Pavo C set macro 65mm/180mm T2.8 135mm T2.5 Blue Coating PL&EF feet19.708,75 € 15.767,00 €