- Home
- Pro audio
- Kondensatormikrofone
- Neumann U 47 FET
Neumann U 47 FET
by NeumannNeumann U 47 fet Collector's Edition Condenser Microphone
- Ratenzahlung Sie können auf Raten mit den Visa, Visa Premium, Maestro, Master Card und Diners reditkarten zahlen. Die Gebühr beträgt 5% des offengelegenen Preises und wird im Warenkorb bei der Zahlungsauswahl gerechnet. Sie können mehr Details auf dem Link Zahlungsarten überprüfen.
- Schnelle Lieferung Für alle Lieferungen innerhalb Kroatiens, die bis 14.00 Uhr erhaltet werden, wird die Lieferung binnen einem Arbeitstag geliefert. Für die ganze Europa nehmen wir die schnelle Zustellung vor und mehr Details können Sie auf dem Link Lieferungsarten überprüfen.
- Internationaler Kauf Die EU-Firmen (außer die Republik Kroatien) zahlen den Preis ohne die Mehrwertsteuer mit dem gültigen VAT ID- Nummer. Der Preis wird bei Check-Out gerechnet. Alle Käufer außerhalb der Europäischen Union zahlen den Ausfuhrpreis ohne die Mehrwertsteuer.
Paket beinhaltet
- Neumann U 47 fet Collector's Edition Condenser Microphone
- Wooden Box
- Collector's Edition Carton Box
- Certificate of Authenticity
- Limited 2-Year Warranty
Built according to the original production documents and schematics of the classic design, the U 47 fet Collector's Edition Condenser Microphone from Neumann is a re-release of this often-copied microphone. A transistorized version of their tube U 47, the U 47 fet features their classic K 47 capsule and boasts a high SPL handling, and has historically found itself at home outside of a kick drum and in front of loud guitar and bass amps, contributing greatly to recordings from the 1960s and 70s. Like the original, there is a slight boost in frequency response around 2 kHz.
The mic features the same low-cut filter as the original at 140 Hz, as well as the selectable -10 dB pad. For additional attenuation, there is a -6 dB output switch, allowing you to hit your mic preamps at a lower level.
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Polar Pattern | Cardioid |
Frequency Range | 40 Hz to 16 kHz |
Signal to Noise Ratio | 69 dB CCIR 76 dB A-Weighted |
Equivalent Noise Level | 25 dB CCIR 18 dB A-Weighted |
Maximum SPL | 137 dB SPL |
Pad | -10 dB |
THD | 0.5% |
Impedance | 150 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 8 mV/Pa at 1 kHz into 1 kOhms |
General | |
---|---|
Output Connectors | 1 x 3-Pin XLR |
Operating Current Consumption | 0.5 µA |
Operating Voltage | 48 V ± 4 V |
Length | 6.30" / 160 mm |
Diameter | 2.48" / 63 mm |
Weight | 1.56 lbs / 710 g |