- Home
- Pro audio
- Zubehör für Mikrofone
- DPA VO4099D d:vote 4099 Clip Microphone for Drum
DPA VO4099D d:vote 4099 Clip Microphone for Drum
by DPA90-Degree Mounting System for Drums, High SPL Handling, 5.5" Adjustable Gooseneck, MicroDot Connector
Includes XLR Adapter, Detachable Cable
- Ratenzahlung Sie können auf Raten mit den Visa, Visa Premium, Maestro, Master Card und Diners reditkarten zahlen. Die Gebühr beträgt 5% des offengelegenen Preises und wird im Warenkorb bei der Zahlungsauswahl gerechnet. Sie können mehr Details auf dem Link Zahlungsarten überprüfen.
- Schnelle Lieferung Für alle Lieferungen innerhalb Kroatiens, die bis 14.00 Uhr erhaltet werden, wird die Lieferung binnen einem Arbeitstag geliefert. Für die ganze Europa nehmen wir die schnelle Zustellung vor und mehr Details können Sie auf dem Link Lieferungsarten überprüfen.
- Internationaler Kauf Die EU-Firmen (außer die Republik Kroatien) zahlen den Preis ohne die Mehrwertsteuer mit dem gültigen VAT ID- Nummer. Der Preis wird bei Check-Out gerechnet. Alle Käufer außerhalb der Europäischen Union zahlen den Ausfuhrpreis ohne die Mehrwertsteuer.
Paket beinhaltet
- DPA Microphones d:vote 4099D Clip Microphone for Drums
- DC4099 Mounting Clip for Drum Rims
- XLR Adapter
The d:vote 4099D Clip Microphone for Drums from DPA Microphones is designed to be used as a clip mic for drums and other percussion sources. It features DPA's 90-degree system that allows you to remount the clip by 90 degrees to provide a variety of mounting positions. The 5.5" gooseneck provides further positioning options.
The microphone itself is a pre-polarized condenser with a supercardioid polar pattern. It features a maximum SPL of 152dB, allowing it to be used on high-volume sources such as toms, kicks, and percussion. Its cable is detachable for easier mounting, and the microphone terminates in a MicroDot connection. An XLR adapter is included for connecting to wired systems.
Transducer Type | Pre-Polarized Condenser |
Polar Pattern | Supercardioid |
Principle of Operation | Pressure Gradient |
Frequency Range | 20 Hz to 20 kHz +/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz |
Sensitivity | 2 mV/Pa; -54 dB Reference: 1 V/Pa (Nominal, +/- 3dB) |
Equivalent Noise Level | Typ. 28 dB(A) Reference: 20 µPa (Maximum 31 dB(A)) (A-Weighted) |
Signal to Noise Ratio | 66 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL) |
Total Harmonic Distortion (THD) | < 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine |
Dynamic Range | 95 dB |
Maximum SPL | 152 dB (Peak Before Clipping) |
Output Impedance | MicroDot: 30 to 40 Ω XLR: 100 Ω |
Cable Drive Capability | XLR: 984' (300 m) |
Output Balance Principle | Signal balanced with XLR adapter |
CMRR | XLR Adapter: >60 dB at 50 Hz to 15 kHz |
Power Supply | Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter |
Current Consumption | MicroDot: 1.5 mA XLR Adapter: 3.5 mA |
Connector | MicroDot XLR Adapter Included |
Polarity | Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter) |
Operating Temperature | -40° to 113°F (-40° to 45°C) |
Relative Humidity | Up to 90% |
Cable Length | 6' (1.8 m) |
Gooseneck | Length: 5.5" (140 mm) |
Capsule Diameter | 0.2" (5.4 mm) |
Microphone Length | 1.8" (45 mm) |
Packaging Info | |
---|---|
Package Weight | 1.15 lb |
Box Dimensions (LxWxH) | 9.8 x 5.9 x 3.0" |