Teradek Bolt 920 Bolt 300 3G-SDI Wireless TX/RX
by TeradekBolt 300 3G-SDI/HDMI Transmitter AND a Bolt 300 3G-SDI/HDMI Receiver
- Ratenzahlung Sie können auf Raten mit den Visa, Visa Premium, Maestro, Master Card und Diners reditkarten zahlen. Die Gebühr beträgt 5% des offengelegenen Preises und wird im Warenkorb bei der Zahlungsauswahl gerechnet. Sie können mehr Details auf dem Link Zahlungsarten überprüfen.
- Schnelle Lieferung Für alle Lieferungen innerhalb Kroatiens, die bis 14.00 Uhr erhaltet werden, wird die Lieferung binnen einem Arbeitstag geliefert. Für die ganze Europa nehmen wir die schnelle Zustellung vor und mehr Details können Sie auf dem Link Lieferungsarten überprüfen.
- Internationaler Kauf Die EU-Firmen (außer die Republik Kroatien) zahlen den Preis ohne die Mehrwertsteuer mit dem gültigen VAT ID- Nummer. Der Preis wird bei Check-Out gerechnet. Alle Käufer außerhalb der Europäischen Union zahlen den Ausfuhrpreis ohne die Mehrwertsteuer.
Paket beinhaltet
- 2 x SDI BNC to BNC 10in Cable
- 2 x HDMI Type A to Type A 12in Cable
- 2 x SDI BNC to BNC 10in Cable
- 1 x 2-pin Connector to PowerTap 18 inch Cable
- 1 x Hot Shoe Adapter (1/4"-20 inch)
- 1 x SDI BNC to BNC 10in Cable
Transmit uncompressed 1080p video wirelessly over 300 feet with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set. Included in this set are a Teradek Bolt 300 transmitter and receiver both equipped with 3G-SDI ports. The units in this kit are compact and feature internal antennas so they can fit on your camera rig and in your video village, DIT cart, or director's monitor rig.
When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.
A boon for DITs, the USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. With this video available, rough edits can be made even before the footage is offloaded from the camera.
-
Bolt 300 3G-SDI Wireless Video Transmitter
The Teradek Bolt 300 3G-SDI Wireless Video Transmitter accepts SDI signals and can transmit them to a Bolt 300 Receiver up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Included with this transmitter is a shoe adapter to mount the unit to a camera's standard accessory shoe and a D-tap to LEMO power cable so you can power the unit with an onboard battery with a D-tap output.
-
Bolt 300 3G-SDI Wireless Video Receiver
The Teradek Bolt 300 3G-SDI Wireless Video Receiver accepts video transmissions from a Bolt 300 transmitter up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Aside from being able to output video via 3G-SDI, the USB 3.0 port can stream the uncompressed video directly to a PC for recording with the GRAB Engine. Included with this transmitter is a 1/4"-20 thumb screw to mount the unit to a video rig and a 1/2"-20 adapter to secure the unit to a small light stand.
Bolt 300 3G-SDI Wireless Video Transmitter |
|
| Video Resolution | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080psf: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 SD: 480i(NTSC)/576i(PAL) |
| Color Sampling | Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later) |
| Inputs | 1 x 75 ohm BNC |
| Outputs | 1 x 75 ohm BNC (loopthrough) |
| Delay | <1 ms (when no video format conversion is enabled) |
| Audio Format | 24-bit 48kHz PCM |
| Frequencies | Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz DFS: 5.27 to 5.55 GHz, 5.67 GHz |
| RF Power | 17 dBm EIRP |
| Range | Up to 300' line of sight |
| Power Input | 2-pin LEMO 7-28 VDC |
| Power Consumption | 6.5 W |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Dimensions | 1.1 x 2.6 x 4.4" / 27 x 66.1 x 112.3 mm |
| Weight | 9.2 oz / 262 g |
Bolt 300 3G-SDI Wireless Video Receiver |
|
| Video Resolution | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080psf: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 SD: 480i(NTSC)/576i(PAL) |
| Color Sampling | Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later) |
| Inputs | N/A |
| Outputs | 1 x 75 ohm BNC 1 x USB 3.0 micro B port |
| Delay | <1 ms (when no video format conversion is enabled) |
| Audio Format | 24-bit 48kHz PCM |
| Frequencies | Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz DFS: 5.27 to 5.55 GHz, 5.67 GHz |
| RF Power | 15 dBm EIRP |
| Range | Up to 300' line of sight |
| Power Input | 2-pin LEMO 7-28 VDC |
| Power Consumption | 8.2 W |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Dimensions | 1 x 3.5 x 5.8" / 25.2 x 88.9 x 146.5 mm |
| Weight | 12.2 oz / 346 g |
- Neu
- Neu
- Neu
- Neu
- Neu
- Neu
- Neu
- Neu
