PTZOptics Producer Plus Live Streaming additional 12X Camera Kit

The 12X Producer Plus Kit from PTZOptics includes one 12x-SDI Gen2 Live Streaming Camera (Gray), one HC-JOY-G3 Serial Controller Joystick, one Intel NUC i7 Skull Canyon PC, one MOTIV MVi Digital Audio Interface for Mac, Windows, iPhone, iPod, iPad, and Android, one Producer+ Upgrade External PCIe Box, one 100' 3G-SDI Cable, one 100' DB9 M-F Cable, one 8" MiniDP to HDMI cable, two 6' HDMI cables, and one wired keyboard and mouse. The kit is designed for use with up to 4 HD broadcast cameras and video/audio mixing programs such as vMix, Wirecast, OBS, and xSplit.

The Intel NUC i7 Skull Canyon is a dedicated PC that can be mounted at the back of your display. It is powered by the i7 2.6GHz quad core processor and features the Intel Iris Pro Graphics 580 card that supports resolutions up to 4K at 60 Hz. The PC comes with a 256GB SSD and 32GB DDR4 RAM. It features four SuperSpeed USB 3.0, one Thunderbolt Type-C, two USB 2.0, two USB 3.0, one HDMI, 1 Mini DisplayPort, and one DisplayPort (via Type-C) ports. In addition, the PC comes pre-loaded with Windows 10 operating system.

PTZOptics 12x-SDI Gen2 Live Streaming Camera (Gray)
This is the 12x-SDI Gen2 model of the PTZOptics lineup of advanced live streaming cameras, in gray, featuring a 3G-SDI output for connecting to switching equipment for broadcast conferencing. The Gen2 model is capable of 1080p60/50 recording (instead of a max of 30 fps), and streaming in H.265 and MJPEG in addition to H.264.

This camera has a 3.5 - 42.3mm lens providing a 12x zoom range, allowing for effective close-focus and wide-angle shots to best suit both face-to-face and group meetings. It does well in low-light conditions owing to a fast f/1.8 - f/2.8 lens aperture and minimum illumination requirement of only 0.5 lux at f/1.8. On top of this, built-in wide dynamic range and 2D and 3D noise cancellation further enhance the conferencing experience. The camera, along with its entire family of 20x and 12x models, is completely open source so developers can customize everything as they prefer using simple HTML commands.

In addition to the 3D-SDI output, the camera also has LAN, HDMI, and composite outputs, RS-232 input and output with daisy-chain capability, and an RS-485 port. The SDI, LAN, and HDMI outputs can be used simultaneously at the same resolution, which can be assigned via a dial on the rear. The composite output can only be used by itself and at 480i/576i resolution. The LAN output is capable of streaming two H.264 or two H.265 RTSP signals, one in HD and one in SD, or a single MJPEG signal, and allows for direct distribution to CDNs, streaming services, and other destinations using only the camera. There's also a 3.5mm audio input for embedding audio into an HDMI signal or LAN stream so you can deliver both audio and video to your destination. The LAN port can be used for streaming and control and also supports Power-over-Ethernet. As an alternative to direct streaming from the LAN port you can also connect external devices for more advanced conferencing. You'll also find a USB 2.0 port among all the connections, but this is strictly for firmware updates.

The camera can be controlled via the LAN port over a network, ONVIF over a network, and RS-232 via VISCA commands. RS-232 control includes control from any NewTek TriCaster, including any of the TriCaster Mini models. Simply connect multiple cameras to the TriCaster using DB9 cables and operate all of them from its software. A TriCaster can also be used over IP control using third-party software.

A large variety of software is supported, including most online meeting software, mobile apps for control over your network, and the advanced PTZOptics Network Control and VISCA Control applications.

An included IR remote control lets you adjust many settings via an on-screen display, allowing you to set and call presets, and control up to four cameras. You can set up to 64 presets in the camera (and up to 255 via RS-232), with a preset accuracy of 0.1°, and you can call up to 10 presets using the remote. The camera can be used desktop-mounted or ceiling-mounted, using an optional PTZOptics ceiling-mount bracket.

Key Features

• 3G-SDI output for connecting to professional switching equipment for broadcast conferencing
• 1080p HD video at up to 60/50 fps
• LAN, HDMI, and composite outputs, RS-232 input/output, RS-485 port
• 3.5mm audio input for embedding audio into an HDMI signal or IP stream
• H.264 and H.265 HD/SD dual-stream, or MJPEG single stream via LAN port
• SDI, LAN, and HDMI ports are simultaneously live
• Open source customizable via HTML commands
• 3.5 - 42.3mm lens with 12x zoom range
• 1/2.7" 2.1MP CMOS sensor
• f/1.8 - f/2.8 lens aperture
• 0.5 lux minimum illumination at f/1.8
• Wide dynamic range
• 2D and 3D noise cancellation
• Control via LAN over a network, ONVIF over a network, and RS-232 via VISCA commands
• Control multiple cameras from any NewTek TriCaster, directly from the TriCaster software
• Set up to 64 presets (or up to 255 via RS-232), with a preset accuracy of 0.1°
• Use desktop-mounted or ceiling-mounted using an optional bracket

HuddleCamHD HC-JOY-G3 3rd Generation Serial PTZ Joystick
The HuddleCamHD HC-JOY-G3 3rd Generation Serial PTZ Joystick is a universal PTZ controller for any VISCA, Pelco-D, and Pelco-P protocol camera. You can control up to 255 cameras, with up to six assignable to "Quick Keys."

This all-metal controller, designed robust to withstand the rigors of daily production, provides zero latency control over RS-232, RS-422, and RS-485 cabling. It does not require a connection to an Ethernet-based network. The maximum communication distance is 3937' over RS-485 using a 24 AWG twisted pair cable.

Key Features

• All-metal housing
• PTZ control for any VISCA, Pelco-D, and Pelco-P protocol camera
• Zero-latency control over RS-232, RS-422, and RS-485 cabling
• Three-axis joystick controller with "twist" for zoom control
• Large LCD menu display
• Key-press sound ("beep") confirmation (can be turned on or off)
• Pan, tilt, zoom, iris, and focus control
• Preset, speed, and OSD control
• Auto/manual focus and iris
• Up to six assignable "Quick Key" cameras
• Real-time display of the current status
• Short circuit and overcurrent protection
• Automatic recovery program for the communication ports

Shure MVi - Digital Audio Interface for Mac, PC, iPhone, iPod, iPad and Android
The MVi from Shure is a single-channel, simple-to-use, digital interface for connecting microphones and instruments to Mac and Windows computers, as well as the range of iOS and Android devices. Simple and flexible, the unit features an XLR + 1/4" TS combo input jack for microphones and instruments, five DSP presets, and a touch panel that allows real-time access to volume, gain and mode selection functions. Phantom power for condenser microphones, appropriate cabling, and a rugged all-metal construction make for reliable digital recording wherever needed.

• Connect any standard XLR microphone or 1/4" plug for guitar, bass or keyboard to any iOS device, Mac or PC for seamless audio capture
• Five built-in DSP preset modes
• Phantom power
• Touch panel allows volume, gain and mode selection adjustments
• Headphone output
• Includes appropriate cables

PTZOptics Producer+ Upgrade External PCIe Box
The Producer+ Upgrade External PCIe Box from PTZOptics comes pre-installed with a Magewell Pro Capture Quad SDI Card (4-Channel). The box features a Thunderbolt 3 interface with two USB Type-C ports and a dedicated DisplayPort for a second monitor.

The Pro Capture Quad SDI Card from Magewell is a normal-profile PCIe Gen2 x4 card that allows for capturing four channels of SDI input. The card supports multiple color sampling modes, 10- and 12-bit color depths, up to eight audio channels at 48 kHz, and output resolutions up to 2048 x 2048 with frame rates up to 120 fps. The card is also capable of numerous video processing features including cropping, scaling, deinterleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.

The Pro Capture Quad SDI Card supports multiple cards per system and unlimited output streams with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports Windows, Linux, and Mac operating systems, multiple APIs for Windows and Linux, and provides Windows SDKs for easier integration.