Syrp Genie II 3-Axis - Epic Kit
by Syrp- 3-Axis Motion Control System
- Genie II Motorized Pan/Tilt Head
- Genie II Linear Drive Unit
- 39" Magic Carpet Slider System
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Syrp Genie II Motorized Pan/Tilt Head
- USB-C to 2.5mm Link Cable Adapter
- USB-C Charging Cable
- USB-C to USB-A Adapter
- USB-C International Wall Charger
- 2.6 x 1.8" Quick Release Plate
- 1/4"-20 and 3/8"-16 Screws
- 1/4"-20 to 3/8" -16 Adapter
- Syrp Genie II Linear
- Battery
- 10' Genie Rope
- 2 x Rope Hooks
- 3.5" Quick Release Plate
- 1/4"-20 Screw
- 3/8"-16 Screw
- 3/8"-16 to 1/4"-20 Adapter
- USB-C Charging Cable
- USB-C International Wall Charger
- USB-C to USB-A Adapter
- Syrp Magic Carpet Medium Track (3.3')
- Syrp Magic Carpet Carriage and End Caps
- Magic Carpet Carriage
- 2 x End Cap
Use the Syrp Genie II 3-Axis Epic Kit to create custom 3-axis motorized camera moves. Designed for video capture, this kit features functions such as time-lapse, keyframing, smartphone control, and live view. It includes the Genie II Motorized Pan/Tilt Head, the Genie II Linear Drive Unit, and a 39" Magic Carpet Slider.
The system supports 11 pounds at up to 60 ° tilt when the slider track is horizontal. When used in a vertical orientation, the Genie II supports up to 5.51 pounds. It features a maximum panning speed of 25°/s, with a maximum tilt speed of 11.25°/s. In Video mode the battery has approximately eight hours of battery life, and while in time-lapse mode the battery will run the Genie II Epic Kit for about 12 hours.
Syrp Genie II Motorized Pan/Tilt Head
Create sliding shots and time-lapses with dynamic pan and tilt movements using the Syrp Genie II Motorized Pan/Tilt Head. Set up basic shots using head's built-in software or create complex moves with keyframes and more using the redesigned control app on your smartphone. Joystick control is featured on both the head and the app, enabling you to easily set start and end points.
Utilizing the full 180° of tilt, the Genie II head can support up to 7.9 pounds, and up to 12.3 pounds if only the middle 90° are being used. Weighing just three pounds, this lightweight head is designed for portability. It snaps easily into the separately available Genie II Linear's integrated quick release system to create a 3-axis motion control head for your slider. Interface features include Bluetooth 4.2 Low Energy, 2.4 GHz Wi-Fi, and a color LCD display window.
A USB-C cable adapter is included for plugging in your camera for app-controlled shutter release and a quick release plate is included for securing your camera. A future app update will include functions like Bulb Ramping for day-to-night time-lapse exposure, Simple Setup, Live View, 360° Time-Lapse, Multi-Row Panorama, and more.
Features
- Control pan and tilt from the head or use the app to add keyframes and more to your moves
- Full 180° of tilt and 360° degrees of pan
- Extremely portable with a weight of only three pounds
- Supports up to 7.9 pounds for 180° tilt, and up to 12.3 pounds for the middle 90° of tilt
- Snaps easily into the separately available Genie II Linear's integrated quick release system
- Interface features Bluetooth 4.2 Low Energy, 2.4 GHz Wi-Fi, and a color LCD display window
Syrp Genie II Linear
Add the Syrp Genie II Linear to your slider along with the included Genie rope, and you can enjoy motorized sliding for precise tracking shots and dynamic time-lapse sequences. The versatile Genie II is also compatible with nearly any third-party slider.
Features include reduced friction on the rope drive, a quick release camera plate for easy setup, keyframing with the Genie 2 app; and joystick, smartphone, and tablet control. Quiet operation and a compact portable design enable you to use the Genie II Linear almost anywhere your travel.
Attach the main unit to your slider's platform, and once the included Genie rope is threaded properly, the Genie II linear can automatically slide along the length of the rope. A smartphone connected via Bluetooth can control the Genie II Linear wirelessly, and when used with the Genie II Motorized Pan/Tilt Head, you can access 3 axes of motion to accomplish more advanced shots.
Future app features will include Bulb Ramping for day-to-night time-lapse exposure, HDR Timelapse, Simple Setup, Live View, 360° Time-Lapse, Multi-Row Panorama, and more.
Features
- Motorized platform is compatible with the Genie II Pan/Tilt Head or third-party sliders
- Reduced rope-drive friction produces reliable vertical motion
- Quick release camera plate for easy setup and adjustments
- Time-lapse and video modes
- Quiet operation; compact, portable design
- Joystick, smartphone, and tablet control
- Genie 2 app enables you to create keyframes for complex moves
Genie 2 App Features
- Multi-axis keyframing
- In-app joystick control for setting start and end points
- Bounce Back (repeat) Mode simplifies interview shoots
- Ease in or out of your movement at any keyframe
Syrp Magic Carpet Medium Track (3.3')
The 3.3' Magic Carpet Medium Track from Syrp provides a sliding surface for the Magic Carpet slider system. It supports loads up to 15.4 lb and is compatible with the optional Magic Carpet Carriage and End Caps.
Syrp Magic Carpet Carriage and End Caps
The Magic Carpet Carriage and End Caps from Syrp are designed for use with either the Magic Carpet 2.6' Short Track or 5.2' Long Track. The Carriage easily slides into the end of the track and includes a brake, a bubble level, and a reversible 3/8"16 and 1/4"-20 threaded screw to attach either a camera, ballhead, or tripod head.
The two End Caps slot into the end of the tracks and have adjustable quick release legs which are easily adjusted by pulling out a lever, without the need for additional tools. The End Caps also include Genie rope lock-off hooks which enable the Syrp Genie Motion Control Time Lapse Device to be easily attached and locked off. Additionally, the end caps have a counter balance wheel which allows for vertical slides with heavier cameras. The Genie rope is simply tied off around the carriage and then thread through the counter balance wheel. A weight is used to offset the camera weight.
- Carriage and End Caps are universal to the Magic Carpet system and fit either the Short Track or Long Track
- Brake and bubble level on Carriage
- Reversible 3/8"-16 and 1/4"-20 threaded screw for attaching camera, ballhead, or tripod head
- End Caps with adjustable quick release legs
- Genie rope lock off hooks for using with Genie Motion Control Time Lapse Device
- Counter balance wheel for vertical slides with heavier cameras
Syrp Genie II Motorized Pan/Tilt Head Specs
|
|
Payload
|
Panning: |
13.2 lb / 6 kg | |
Tilting: | |
60°: 16 lb / 7.3 kg | |
90°: 13.2 lb / 6 kg | |
180°: 7.9 lb / 3.6 kg | |
Speed | Pan: 25° per second |
Tilt: 15° per second | |
Minimum Resolution | Pan: 0.01 ° |
Tilt: 0.01 ° | |
Connections | 3 x USB-C: Charging, camera trigger, camera control |
Wireless | Bluetooth 4.2 LE: Smartphone app connection |
2.4 GHz Wi-Fi: Image transfer and processing | |
Mount Type | Camera/Ball Head: 1/4"-20, 3/8"-16 screws |
Base: 3/8"-16 thread, (includes 1/4"-20 to 3/8"-16 adapter) | |
Dimensions | 5.4 x 4.7 x 4.4" / 137 x 120 x 112 mm |
Weight | 3.1 lb / 1.4 kg |
Packaging Info
|
|
Package Weight | 4.2 lb |
Box Dimensions (LxWxH) | 8.5 x 5.6 x 5.5" |
Syrp Genie II Linear Specs
|
|
Payload Capacity
|
Horizontal: 16.5 lb / 7.5 kg |
Vertical: Up to 11 lb / 5 kg | |
Maximum Speed | Linear: 4.3" / 110 mm per Second |
Minimum Resolution | 0.0004" / 0.01 mm |
Connectivity | Bluetooth Low Energy 4.2 |
2.4 GHz | |
Interface | 1 x USB Type C |
1 x 2.5 mm Jack | |
Mount Type | Quick Release Plate Screws: 1/4"-20, 3/8"-16 |
Base: 3/8"-16 Thread with 1/4"-20 Adapter | |
Rechargeable Battery Type | 11.1 V, 2600 mAh Lithium-Ion |
Battery Life | Time-Lapse Mode: 14 h |
Video Mode: 8 h | |
Battery Charge Time | 3 h |
Dimensions | 4.9 x 4.6 x 2.8" / 124 x 116 x 70 mm |
Weight | 2 lb / 0.9 kg |
Packaging Info
|
|
Package Weight | 3.22 lb |
Box Dimensions (LxWxH) | 6.35 x 5.55 x 5.5" |
Syrp Magic Carpet Medium Track (3.3') Specs
|
|
Load Capacity
|
2.2 to 15.4 lb (1 to 7 kg) |
Dimensions | Length: 3.3' (100 cm) |
Width: 5" (12.5 cm) | |
Rail Diameter | 0.98" (2.5 cm) |
Weight | 2.95 lb (1.34 kg) |
Packaging Info
|
|
Package Weight | 4.75 lb |
Box Dimensions (LxWxH) | 41 x 6 x 2.8" |
Syrp Magic Carpet Carriage And End Caps Specs
|
|
Compatibility
|
Magic Carpet 2.6' (80 cm) Short Track or 5.2' (160 cm) Long Track |
Mounting Screw | 3/8"-16 and 1/4"-20 (reversible) |
Packaging Info
|
|
Package Weight | 2.35 lb |
Box Dimensions (LxWxH) | 8.8 x 6.1 x 2.5" |