Teradek Bolt 4K 750 12G-SDI/HDMI Wireless RX
by Teradek- Receives from up to 750' Line of Sight
- Supports up to 4K60 Resolution
- Compatible with Bolt 4K Line
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Teradek Bolt 4K 750 12G-SDI/HDMI Wireless Receiver
- 2 x Bolt 4K Wire Cover Plate (Machined Anodized)
- HDMI Type A Cable (18")
- 2-Pin to D-Tap Power Cable (18")
- USB Type-A to Type-B Cable (3')
- 12G-SDI BNC Cable (18")
- 30W Power Supply with 6' Cable
- 5 x Antenna
- 2 x Flathead Screw
- Box with Foam
With the Bolt 4K 750 12G-SDI/HDMI Wireless Receiver from Teradek, you can receive visually lossless 4K60 video signals from any Bolt 4K transmitter with less than 1 ms of latency and send them out two 12G-SDI outputs or one HDMI output. The receiver unit can be secured to a camera or other SDI/HDMI video source via built-in 1/4"-20 or 3/8"-16 threaded holes. The five included antennas provide a powerful signal that can receive from up to a 750' line of sight.
The receiver supports cross conversion from HDMI input to SDI loop output. It also supports HDR workflows, 10-bit 4:22 via 12G-SDI, and 8-bit 4:4:4 via HDMI. Its bright LED screen shows current settings and frequencies, and the transmitter can also connect with the Bolt app for iOS via Bluetooth for configuration.
Power can be provided using the integrated 2-pin connector or by separately available Gold or V-mount battery plates. A Bolt 4K transmitter supports up to six receivers, and it can operate up to six transmitters with receivers in the same area with Wi-Fi or 5 GHz appliances with the help of the noise rejection feature. It also features built-in AES-256 encryption with RSA-1024 key exchange to protect your video from prying eyes.
- Two 12G-SDI outputs and one HDMI output
- 750' line-of-sight range
- Compatible with any Bolt 4K transmitter
- Up to 48 kHz 24-bit PCM embedded audio supported
- SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
- 1/4"-20 and 3/8"-16 mounting points
- 2-pin LEMO-type power input
- Built-in display with joystick navigation
- Micro-USB port for upgrades
Teradek 750 Specs
Wireless
|
Wireless Range |
750' / 228.6 m (Line-of-Sight) |
|
# of Channels |
14 (40 MHz) |
|
Frequency Range |
US: 5.19 to 5.23 GHz |
|
Latency |
< 1 ms |
|
RF Power |
17 dBm |
|
Wi-Fi |
5 GHz |
|
Wireless Video Compression |
Uncompressed |
Interfaces
|
Antenna Ports |
5 x RP-SMA Female |
|
Video Connectors |
2 x BNC (12G-SDI) Output |
|
Other I/O |
1 x USB Micro-B USB 2.0 Input |
|
Embedded Audio |
HDMI: 2-Channel |
|
Encryption |
256-Bit AES |
Format Support
|
Broadcast System Compatibility |
NTSC, PAL |
|
Video Format |
SDI/BNC: |
|
Audio Format |
2-Channel 24-Bit 48 kHz PCM Audio |
|
Timecode Support |
Yes |
|
LUT Support |
Yes |
Power
|
Built-In Battery |
None |
|
Power Connector |
1 x 2-Pin LEMO (6 to 28 VDC) Input |
|
Power Consumption |
(18 W) |
Environmental
|
Operating Temperature |
32 to 104°F / 0 to 40°C |
General
|
Mounting |
1 x 1/4"-20 Female |
|
Materials |
Aluminum |
|
Dimensions |
5.47 x 4.41 x 1.06" / 139 x 112 x 27 mm |
|
Weight |
15.2 oz / 432 g |
Packaging Info
|
Package Weight |
2.785 lb |
|
Box Dimensions (LxWxH) |
8.8 x 6.8 x 4.9" |
- Novo
- Novo
DZOFilm Catta 35-80 & 70-135mm T2.9 E-Mount Cine Zoom 2-Lens Bundle (Black)48.475,00 kn 38.780,00 kn
