Teradek Bolt 4K LT 1500 TX/RX
by Teradek- Bolt LT 1500 Transmitter & Receiver Set
- Transmits up to 1500' Line of Sight
- Supports up to 4K30 Resolution Input
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Teradek Bolt 4K LT 1500 3G-SDI/HDMI Wireless Transmitter and Receiver Kit
- Bolt 4K LT 1500 3G-SDI/HDMI Wireless Transmitter
- Bolt 4K LT 1500 3G-SDI/HDMI Wireless Receiver
- 2-Pin to D-Tap Power Cable (18")
- Micro-USB to USB Type-A Cable (36")
- 18W AC Adapter Cable with 2-Pin Connector (6')
- 2 x BNC Cable (10")
- 7 x Antenna
- 1/4"-20 Light Stand Adapter
- Shoe Adapter
- Carry Case
Transmit and receive lossless HD video from up to 1500' line of sight with the Bolt 4K LT 1500 3G-SDI/HDMI Wireless Transmitter and Receiver Kit from Teradek. The kit includes a wireless transmitter and receiver that feature bright OLED displays and can wirelessly receive up to 4K30 video with 10-bit 4:2:2 HDR support. The transmitter inputs up to 4K video over HDMI or up to 1080p60 video via 3G-SDI, and the receiver outputs video via HDMI and 3G-SDI.
The transmitter sends up to 4K30 video to the Bolt 4K LT receiver, and it can also simultaneously transmit to up to six receivers. The system features improved metadata, range, and compatibility over its predecessors. The built-in AES-256 encryption with RSA 1024 key pairing protects your video from prying eyes, while noise rejection keeps your video clean no matter how many devices are using the wireless spectrum. The Bolt LT system also supports the transmission of timecode and start/stop triggers from the camera.
The Bolt 4K series units are all cross-compatible, so you can transmit to different Bolt 4K series receiver models. The system also supports an iOS app that easily connects via Bluetooth, which provides a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20, 3/8"-16, and M3 mounting threads to mount your transmitter and receiver on a variety of cameras, cages, or rigs.
- Transmitter/receiver set cross-compatible with all Bolt 4K series devices over 5 GHz signal spectrum
- Transmitter input up to 4K via HDMI video; input 1080p via 3G-SDI, and transmit up to 4K30 video
- Receiver supports up to 4K30 video and outputs 1080p via 3G-SDI and 4K via HDMI
- Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut
- Smaller and lighter chassis design than other Bolt transmitters
- Transmit to up to six Bolt 4K series receivers
- AES-256 encryption support and RSA 1024 key pairing support
- Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration
Teradek LT 1500 Specs
Wireless
Wireless Range |
1500' / 457.2 m (Line-of-Sight) |
# of Channels |
13 (40 MHz) |
Channel Bandwidth |
40 MHz, 20 MHz |
Frequency Range |
Non-DFS Frequencies |
Latency |
< 0.01 ms |
RF Power |
17 dBm |
Wireless Video Compression |
Uncompressed |
Interfaces
Transmitter Antenna Ports |
2 x RP-SMA |
Receiver Antenna Ports |
5 x RP-SMA |
Transmitter Video Connectors |
1 x HDMI Input |
Receiver Video Connectors |
1 x HDMI Output |
Transmitter Other I/O |
1 x USB Micro-B Input |
Receiver Other I/O |
1 x USB Micro-B Input |
Embedded Audio |
SDI: 2-Channel |
Encryption |
256-Bit AES |
Format Support
Video Format |
SDI/BNC: |
Audio Format |
2-Channel 24-Bit 48 kHz LPCM Audio |
Timecode Support |
Yes |
Display
Transmitter Panel Type |
OLED |
Receiver Panel Type |
OLED |
Power
Transmitter Built-In Battery |
None |
Receiver Built-In Battery |
None |
Transmitter Power Connector |
1 x 2-Pin LEMO (6 to 28 VDC) Input |
Receiver Power Connector |
1 x 2-Pin LEMO (6 to 28 VDC) Input |
Transmitter Power Consumption |
Device: (9 W) |
Receiver Power Consumption |
Device: (11 W) |
Environmental
Operating Temperature |
32 to 104°F / 0 to 40°C |
General
Transmitter Mounting |
1 x 1/4"-20 Female |
Receiver Mounting |
1 x 1/4"-20 Female |
Materials |
Aluminum, PCB |
Transmitter Dimensions |
4.1 x 2.4 x 1.3" / 103 x 60 x 33 mm |
Receiver Dimensions |
4.8 x 3.7 x 1.1" / 122 x 94 x 27 mm |
Transmitter Weight |
7.3 oz / 206 g |
Receiver Weight |
10.3 oz / 292 g |
Packaging Info
Package Weight |
7.95 lb |
Box Dimensions (LxWxH) |
8.5 x 7 x 5" |