Teradek Bolt 911 Bolt 300 HDMI Wireless TX

by Teradek

Dostupnost: Isporuka 7-10 dana

SKU

TRD-10-0911

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000ft over the unlicensed 5GHz band.

1.463,50 € 1.170,80 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Teradek Bolt Pro 911 Multicast Wireless Transmitter
Bolt Transmitter
2-Pin LEMO to P-Tap Cable (18")
Hot Shoe Adapter
HDMI Cable

Opis

The Teradek Bolt Pro 911 Multicast Wireless Transmitter is a latency-free wireless transmitter that sends 4:2:2, 1080p 60 video at up to 300ft with less than 1 millisecond delay. This unit is the transmitter only, which features an internal antenna and 4-LED indicator lights. The Bolt Pro system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference.

This Bolt Pro unit is the transmitter only and features an HDMI input, you can transmit to a Bolt receiver that features either an HDMI or an SDI output, allowing you to take HDMI in, transmit, and output via HDMI or SDI depending on the type of receiver you are using. You can also mix and match SDI & HDMI receiver units, up to a total of 4 receivers.

The system can transmit up to 300 feet line of sight with less than 1 ms delay. Transmission through walls is possible, with reduced distance depending on the wall's construction.
The Bolt Pro system simultaneously transmits full 1080p60 video to up to four receivers, and supports timecode and metadata pass-through.
The Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range up to 300' (91.4m) and can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time.
The transmitter and receiver each feature LED indicators for video signal and link.
Bolt transmitters are housed in a 9.2 oz milled aluminum chassis with multiple 1/4"-20 mounting holes. The receiver is enclosed in a 12.2 oz milled aluminum chassis with multiple 1/4"-20 mounting holes. The transmitter requires approximately 6.5W of power, while the receiver consumes only 8.2W. Power is via a LEMO cable to optional external power sources, such as V-Mount or Gold Mount batteries.

Specifikacije

Input	HDMI
Resolution	1080p: 60/59.94/50/30/29.97/25/24/23.98 1080psf: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480p: 59.94/576p50 (via HDMI ports only) 480i: NTSC 576i: PAL
Color Sampling	Y:Cb:Cr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later) RGB 4:4:4: 8-bit (HDMI out)
RF Power	17 dBm EIRP
Wireless Range	300.0' (91.4 m)
Audio	48kHz 24-bit PCM
Power Input	2-Pin LEMO 7-28 VDC
Power Consumption	1080p 60: 6.5 W
Chassis	Milled aluminum
Mounting	Multiple mounting options with 1/4"-20 holes
Mount	Accessory shoe mount
Dimensions	1.1 x 2.6 x 4.4" / 27 x 66.1 x 112.3 mm
Weight	9.0 oz / 262 g