Teradek Bolt 965-1V Bolt 1000 3G-SDI/HDMI TX/RX Deluxe V-mount

by Teradek
Dostupnost: Isporuka 7-10 dana
SKU
TRD-10-0965-1V

The Bolt 1000 Deluxe Kit has everything you need to get up and running with Bolt. It comes with a Bolt 1000 Transmitter and Receiver set with options for 1 or 2 Receivers, an antenna array to improve reception, a Dual Battery Mount plate for the Receiver, that can all fit with the included SKB Utility Case.

7.359,50 € 5.887,60 €

Sadržaj pakiranja

  • Teradek Bolt 1000 SDI/HDMI Wireless Transmitter & Receiver Deluxe Kit (V-Mount)
  • Protective Case for 2nd Generation Bolt Pro Transmitter & Two Receivers
  • Antenna Array for Bolt Receiver
  • Dual 14.4V V-Mount Battery Plate for Bolt Pro 300/500/1000/2000/3000 Receivers
  • 4 x Color Identification Brackets for Transmitter
  • 4 x Color Identification Brackets for Receiver
  • 2-Pin LEMO to P-Tap Cable (11")
  • 2 x SDI Cable
  • 2 x HDMI Cable
  • Screw Set
  • 2 x Transmitter Antennas
  • 2-Pin LEMO to P-Tap Cable (18")
  • Accessory Shoe Adapter
  • 1/4"-20 Light Stand Adapter
  • 1/4"-20 Thumbscrew (1.25")
  • Power Supply
  • 5 x Receiver Antennas
  • USB Cable (3')
  • 3/8"-16 Light Stand Adapter
  • 5 x N-Type Male to RP-SMA Cable (12")
  • 1/4"-20 Thumbscrew (2")
  • 1/4"-20 Thumbscrew (0.375")
  • 1/4"-20 Phillips Machine Screw

Transmit uncompressed 1080p SDI or HDMI video wirelessly over 1000 feet line-of-sight with the Teradek Bolt 1000 SDI/HDMI Wireless Transmitter & Receiver Deluxe Kit. Included in this set are a Teradek Bolt 1000 transmitter and receiver, which are equipped with both 3G-SDI and HDMI ports. The transmitter can pair with and multicast to up to four receivers (additional receivers not included). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. The included Panel Antenna improves reception in crowded frequency situations.
Transmitting across the 5 GHz frequency range, the transmitter/receiver pair utilizes Dynamic Frequency Selection (DFS) to find a clean signal between the transmitter and receiver. This is desirable when working in areas with crowded frequencies. Both transmitter and receiver are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. The included waterproof case with custom-cut foam carries all the bundled components during transport and storage.

  • The Bolt 1000 transmitter and receiver pair can transmit 1080p60 video up to 1000' line-of-sight with less than 1 ms of latency when not converting video formats.
  • The transmitter and receiver can cross convert your video signal during transmission.
  • The hardened aluminum chassis is designed to withstand the rigors of production, and features 1/4"-20 threaded mounting holes.
  • The built-in USB port on the receiver enables direct connection to a computer, so you can capture video directly from the receiver into your computer over USB 3.0. With this video available, rough edits can be made even before the footage is offloaded from the camera.
  • A built-in OLED information screen is built into the receiver. This enables rapid setup and confirmation of your settings.
  • Utilizing the OLED screen, you can apply 3D LUTs with the press of a button. Upload your own LUTs using the free Bolt Manager software, or select from several built-in presets using Bolt's OSD.
  • 20 MHz and 40 MHz Channels
  • You can select to transmit in 20 or 40 MHz channels. However, please note that while 20 MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions, they do not support audio transmission, as well as interlaced, PsF, and 1080p 60/50 frame rates. The 40 MHz channels support audio, interlaced, PsF, and 1080p 60/50.
  • All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.
  • You can select either dynamic or manual frequency.
  • The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. As a result, you may achieve a boost in the reception range, but it will not be above the maximum range.
  • Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)
  • Composed of three 16 dBi and two 14 dBi antennas using 5.1-5.8 GHz MIMO
  • Small, lightweight, and made from UV-protected plastic with aluminum alloy

Protective Case

  • The Teradek Protective Case is an injection molded military-standard waterproof case built by SKB. Molded of ultra high-strength polypropylene copolymer resin, this case features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage.
  • Waterproof and dust-tight design
  • Molded-in hinge for added protection
  • Trigger release latch system
  • Snap-down, rubber over-molded cushion grip handle
  • Ambient pressure equalization valve
  • Resistant to UV, solvents, corrosion, fungus
  • Resistant to impact damage
Transmitter
Video Input 1 x 3G/HD/SD-SDI, BNC (75 Ohms)
1 x HDMI
Video Output 1 x 3G/HD/SD-SDI, BNC (75 Ohms), loop-through out
Channels Number of 20 MHz DFS Channels: 24 (200 MHz channels cannot utilize interlaced, PsF, or 1080p 60/50)
Number of 40 MHz DFS Channels: 11 (USA)
Delay <0.001 sec (when no video format conversion is enabled)
Color Sampling RGB 4:4:4 (HDMI out, 8-bit color)
YCbCr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v1.1.0 or later)
Formats 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
1920 x 1080PsF 30/29.97/25/24/23.98
1920 x 1080i 60/59.94/50
1280 x 720p 60/59.94/50
576 50 (via HDMI ports only)
480p 59.94 (via HDMI ports only)
576i/480i
NTSC/PAL
Wireless Range: Up to 1000' / 305 m line-of-sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz (US) / 5.19 to 5.23 GHz (EU & JP)
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz (US) / 5.27 to 5.67 GHz (EU & JP)
RF Power 17 dBm EIRP (with two 2 dBi TX antennas)
Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
Audio 48 kHz, 24-bit PCM
Mounting 1/4"-20 threaded mounting holes
Power Volts: 7 to 28 VDC
Consumption: 7.5 W
Connector: 2-pin LEMO
Dimensions 0.9 x 2.6 x 4.0" / 2.4 x 6.6 x 10.2 cm
Weight 8 oz / 226.8 g
Receiver
Video Output 1 x 3G/HD/SD-SDI, BNC (75 Ohms)
1 x HDMI
1 x Micro-USB 3.0
Delay <0.001 sec (when no video format conversion is enabled)
Color Sampling RGB 4:4:4 (HDMI out, 8-bit color)
YCbCr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v1.1.0 or later)
Formats 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
1920 x 1080PsF 30/29.97/25/24/23.98
1920 x 1080i 60/59.94/50
1280 x 720p 60/59.94/50
576 50 (via HDMI ports only)
480p 59.94 (via HDMI ports only)
576i/480i
NTSC/PAL
Wireless Range: Up to 1000' / 305 m line-of-sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz (US) / 5.19 to 5.23 GHz (EU & JP)
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz (US) / 5.27 to 5.67 GHz (EU & JP)
RF Power 17 dBm EIRP (with one 2 dBi TX antenna)
Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
Audio 48 kHz 24-bit PCM
Power Volts: 7 to 28 VDC
Consumption: 8.5 W
Connector: 2-pin LEMO
Dimensions 5.5 x 3.5 x 0.9" / 13.9 x 8.9 x 2.5 cm
Weight 13.3 oz / 376 g

Izdvojeni proizvodi