- Početna
- Pro video
- Bežični prijenos
- Teradek Bolt 966 Bolt 1000 3G-SDI/HDMI Wireless TX
Teradek Bolt 966 Bolt 1000 3G-SDI/HDMI Wireless TX
by Teradek
Dostupnost:
Isporuka 7-10 dana
SKU
TRD-10-0966
Bolt 1000 Transmitter which will work with Bolt 1000 Receivers. This Transmitter can take either 3G-SDI or HDMI input.
4.071,50 €
3.257,20 €
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Teradek Bolt Pro 1000 3G-SDI/HDMI Transmitter
- 2 x Wireless Antenna (2 dBi 2.4/5.8 GHz)
- 2-Pin LEMO to D-Tap Cable (18")
- Hot Shoe 1/4"-20 Adapter
- SDI/BNC Cable (10")
- HDMI Cable (18")
- SKB Protective Waterproof Case
With highly refined software, new wireless radios, and a redesigned chassis, the Bolt Pro 1000 3G-SDI/HDMI Transmitter from Teradek is a reliable and capable monitoring solution. This transmitter includes metadata and timecode support, 3D LUTs, USB 3.0 GRAB Engine, dual inputs/outputs, is multicast capable, and offers manual frequency selection.
-
- Transmits visually lossless video up to 1000’ with no delay
- 20 MHz channels
- Two DFS channels operate interference-free
- Small and light chassis allows the transmitter to integrate into any rig unnoticed
- Removable colored top plates easily identify which Bolt receivers work together
- Rapidly reconnects during a dropped link once you move back into range
- Ideal for use with MoVI and other gimbals
- Built-in HDMI to SDI converter allows you to connect your on-camera monitor and video source via the same device
- Reaches full range and potential right out of the box with new software that provides a robust wireless link
Video Input | 1 x BNC. 75 Ohms 1 x HDMI Type A |
Video Output | 1 x BNC. 75 Ohms (loop-through out) |
Video Delay | Transmitter to Receiver: <0.001 sec (when no video format conversion is enabled) |
Color Sampling | YCbCr = 4:2:2, 8-bit for SDI (10-bit, without format conversion and FPGA v1.1.0 or later) RGB 4:4:4 (HDMI out, 8-bit color) |
Supported Resolutions | 1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 30/29.97/25/24/23.98 1080i 60/59.94/50 720p 60/59.94/50 576p 50 (via HDMI port only) 480p 59.94 (via HDMI port only) 480i (NTSC) / 576i (PAL) |
Wireless | Up to 1000' (304.8 m) line of sight Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz |
RF Power | 19 dBm EIRP (with two 5 dBi transmitter antennas) |
Noise Rejection | Can coexist with Wi-Fi and 5 GHz cordless phones |
Audio | Format Support: 48 kHz, 24-bit PCM |
Material | Milled aluminum |
Mounting | Multiple mounting options with 4-40 holes Multiple mounting options with 1/4"-20 hole |
Operating Temperature | 32 to 122°F (0 to 50°C) |
Power | 2-Pin LEMO 7 to 28 VDC No internal battery Consumption: 7.5 W |
Dimensions | 0.9 x 2.6 x 4.5" (2.3 x 6.6 x 11.4 cm) Case: 12 x 9.0 x 4.5" (30.5 x 22.9 x 11.4 cm) |
Weight | 8 oz (226 g) |
Izdvojeni proizvodi