- Početna
- Video i foto oprema
- Monitori i viewfinderi
- TVLogic LVM-245W 24'' True 10-bit Multi-Format LCD Monitor
TVLogic LVM-245W 24'' True 10-bit Multi-Format LCD Monitor
by TVLogic- 24″ 1920×1080 Native HD Resolution
- Matte Finish Panel
- High-Purity Precision RGB Matrix LED Backlight Array
- 1:1 Pixel Mapping Modes for SD/HD
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- TVLogic LVM-245W 24'' True 10-bit Multi-Format LCD Monitor
TV Logic LVM-245W (LVM245W) 24 Inch 1920 x 1200 Native HD LCD broadcast monitor. LVM-245W is a broadcast monitor with high picture quality and professional features. Utilizing the same state-of-heart TFT-LCD panel of XVM-245W, this monitor provides the smooth colour ramp with 10bit colour depth, high colour purity and wide viewing angel. It supports various video interface of SD/HD/3G-SDI, DVI, HDMI, Component Video, S-Video and CVBS. Also provides professional features such as Waveform & Vectorscope, Markers, Timecode, Closed Captions and colour calibration.
LVM-245W is a broadcast monitor with high picture quality and professional features. Utilizing the same state-of-heart TFT-LCD panel of XVM-245W, this monitor provides the smooth colour ramp with 10bit colour depth, high colour purity and wide viewing angel. It supports various video interface of SD/HD/3G-SDI, DVI, HDMI, Component Video, S-Video and CVBS. Also provides professional features such as Waveform & Vectorscope, Markers, Timecode, Closed Captions and colour calibration.
Features:
- 24″ 1920×1080 Native HD Resolution
- Matte Finish Panel
- High-Purity Precision RGB Matrix LED Backlight Array
- 1:1 Pixel Mapping Modes for SD/HD
- Supports TVLogic Colour Calibration Utility for proper
- color alignment
- Supports Multi-point Calibration for RGB and White
- uniformity correction
- Firmware update by using Ethernet or USB
- GPI (RJ45)
- Timecode Display (VITC/LTC)
- Waveform/Vectorscope (Y/Cb/Cr, RGB Wide type,
- Line Waveform and Range Error) H/V Delay
- Marker / User Aspect Key lock
- Blue Only/Mono X3 Zoom(PBP)
- UMD (ANC, Manual, Dynamic & User)
- Closed Caption: CEA- 608/708 (SDI), Line 21, ANC,
- OP-42, OP-47
- Monitor control by using RS422
Display Spec: | |
Size: | 24.1" |
Resolution: | 1920 X 1200 (16 : 10) |
Pixe Pitch: | 0.270mm |
Colour Depth: | 1.07B |
Viewing Angle: | 178°(H) / 178°(V) |
Luminance: | 250cd/m2 |
Contrast Ratio: | 1000:01:00 |
Display Area: | 518(H) x 324(V) mm |
Input: | |
1 X BNC: | Analog Input (Composite) |
3 X BNC: | Analog Input (Component) |
2 X BNC: | 3G-SDI A/B Channel Input |
1 X HDMI: | HDMI Input |
1 X DVI: | DVI Input |
Output: | |
1 X BNC: | Analog Output (Composite) |
3 X BNC: | Analog Output (Component) |
2 X BNC: | 3G-SDI A/B Channel Output |
Audio: | |
Audio In: | Embedded Audio/Analog Stereo (Phone Jack) |
Audio Out: | Analog Stereo (Phone Jack), Internal Speaker(Stereo) |
FPGA Functions: | |
1:1 Pixel Mapping Modes for SD/HD, | |
3G-SDI Level A/B, | |
Audio Level Meter Display, | |
Blue Only, | |
Focus Assist, | |
H/V Delay, | |
Key Lock, | |
Luma(Y') Zone Check, | |
Marker, | |
Mono, | |
Range Error, | |
Time Code Display, | |
UMD, | |
User Aspect, | |
Various Scan Modes, | |
Waveform/Vector, | |
X3 Zoom(PBP), | |
Zoom | |
Closed Caption: | |
CC-608 ANC, CC-608 LINE 21, CC-708, CC-KOR, OP42, OP47 | |
Calibration: | |
TVLogic Color Calibration Utility | |
Other Functions | |
REMOTE: | GPI (RJ45) |
REMOTE: | TVLogic’s specification |
USB: | Firmware update by USB cable |
Ethernet: | Ethernet Control support |
Conversion: | SDI-to-SDI, |
Dimensions: | |
Main Body: | 552.5 x 389 x 95 (mm) / 21.75 x 15.31 x 3.74 (inch) |
With stand: | 586.1 x 416.8 x 150 (mm) / 23 x 16.4 x 5.9 (inch) |
Weight: | 10.5kg / 23.1lbs |