- Početna
- Video i foto oprema
- Monitori i viewfinderi
- TVLogic SWM-171A 16.5'' FHD Studio wall monitor with IPS wide viewing
TVLogic SWM-171A 16.5'' FHD Studio wall monitor with IPS wide viewing
by TVLogicThe SWM series monitors are newly designed with a clean bezel with only a power button and a small indication lamp ideal for studio wall configuration Along with the traditional interfaces of 3G-SDI, HDMI and DVI, an optical fibre interface has been added for added flexibility. Features include Markers/Mattes, Timecode, Audio Level Meters, various CCs and UMDs.
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
TVLogic SWM-171A 17-inch Studio Wall Monitor - TVL-SWM-171A
The SWM series monitors are newly designed with a clean bezel with only a power button and a small indication lamp ideal for studio wall configuration Along with the traditional interfaces of 3G-SDI, HDMI and DVI, an optical fibre interface has been added for added flexibility. Features include Markers/Mattes, Timecode, Audio Level Meters, various CCs and UMDs.
Audio Level Meter Display
Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.
Closed caption
Closed caption.
Blue Only / Mono
Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
H/V Delay
Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the centre of the screen.
Marker
Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of the standard markers fits your requirements.
Time Code Display
Displays the Timecode information on the screen.
User Aspect
Adjusts the Width /Height display ratio.
3G-SDI Level A/B
Supports 3G-SDI Level A/B input.
UMD
Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.
SPECIFICATIONS | |||
Display Spec. | |||
Size | 16.5" | ||
Resolution | 1920 X 1080 (16 : 9) | ||
Pixe Pitch | 0.1905mm | ||
Color Depth | 1.07B | ||
Viewing Angle | 178°(H) / 178°(V) | ||
Luminance | 450cd/m2 | ||
Contrast Ratio | 1400:1 | ||
Display Area | 366(H) x 206(V) mm | ||
Input | |||
2 X BNC | 3G-SDI A/B Channel Input | ||
1 X HDMI | HDMI Input | ||
1 X DVI | DVI Input | ||
1 X SFP Module | SFP Module Input(Optional) | ||
Output | |||
2 X BNC | 3G-SDI A/B Channel Output | ||
Audio | |||
Audio Out | - | ||
FPGA Functions | |||
, 3G-SDI Level A/B, Audio Level Meter Display, Blue Only, H/V Delay, Marker, Mono, Time Code Display, UMD, User Aspect | |||
Closed Caption | |||
CC-608 ANC, CC-608 LINE 21, CC-708, CC-KOR, OP42, OP47 | |||
Calibration | |||
Other Functions | |||
USB | AUTO Calibration | Firmware update by USB cable | Firmware update by USB memory stick |
Ethernet | Ethernet Control support | ||
Conversion | SDI-to-SDI, | ||
Options | |||
Stand, ND Acrylic Filter, Rack Mount Kit(Single), |