Saramonic SR-M1 3.5mm Lavalier Microphone of Blink500 Transmitter
by Saramonic- For Wireless Systems, Cameras, Recorders
- Omnidirectional for Consistent Levels
- Compatible 3.5mm Transmitter List Below
- Requires 1 to 10V Plug-In Power
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (Black)
- Lapel Clip
- Foam Windscreen
The black Saramonic SR-M1 is an omnidirectional lavalier microphone featuring a 4.1' cable with a 3.5mm TRS mini plug compatible with audio recorders, DSLR/mirrorless cameras, and a wide variety of wireless systems including the Blink 500 and Blink 500 Pro.
The small size of the lav allows for discreet placement using the included lapel clip, while the 4.1' cable length is well suited for use with a wireless transmitter or handheld recorder. A wide range of compatible devices makes the cost-effective SR-M1 a good choice as a spare or backup mic for content creators. The mic capsule's forgiving omnidirectional pickup pattern helps to keep levels consistent, even when the talent turn away from the mic. The foam windscreen helps reduce breath sounds and light wind noise, while the lapel clip allows you to easily attach the mic to clothing.
3.5mm Connector
- The SR-M1 features a non-locking 3.5mm connector that is compatible with a wide variety of transmitters, cameras, portable audio recorders, and similar devices equipped with a compatible input connector and the ability to supply the mic with 1 to 10V of plug-in power.
- The non-locking 3.5mm connector is compatible with many devices that use a locking 3.5mm connector, but the connection is less secure and reliable without the locking mechanism.
Compatible Wireless Transmitters and Recorders
Below is a list of transmitter models that are known to be compatible with the SR-M1
- Saramonic: UwMic Series TX9/TX15/TX10, Blink 500 Pro TX, Blink 500 TX, VmicLink TX, SR-Q2, and SR-Q2M
- Sennheiser: Evolution Series G1/G2/G3/G4, XSW-D, SK AVX, SKD1, SK1093, and SK20
- Rode: Wireless GO, RODELink TX-Belt, and TX-XLR,
- Tascam: DR-05, DR-05 mkII, DR-05X, DR-07, DR-07 mkII, DR-07X, DR-10L, and DR-10C
- Zoom: F1-LP, F1-SP, H1, H1n, H2, H2n, H4, H4n, H4n Pro, H5, H6, and XYH-6
- Azden: 35BT and 15BT
- Nady: UB10, UB16, WLT14, and WLT15
- Senal: AWS-2000
- Boya: TX8, TX8 Pro, and WFM12
- Roland: R-05 and R-07
- Sony: PMC-A10, PMC-D10, PMC-D50, PMC-D100, and PMC-D1
- Marantz: PMD620
| Saramonic SR-M1 Specs | |
|
Microphone
|
|
| Form Factor | Lavalier |
| Sound Field | Mono |
| Capsule | 1 x Electret Condenser |
| Polar Pattern | Omnidirectional |
| Windscreen | Foam (Included) |
|
Performance
|
|
| Maximum SPL | 110 dB SPL |
| Impedance | 2.2 Kilohms |
| Sensitivity | -39 dB (1 kHz) |
| Signal-to-Noise Ratio | 60 dB |
| THD | < 1% |
|
Connectivity
|
|
| Output Connectors | 1 x 1/8" / 3.5 mm TRS Male |
| Cable Length | 4.1' / 1.2 m |
|
Power
|
|
| Operating Voltage | 1 to 10 V (Plug-In Power) |
| Operating Current Consumption | 500 µA |
|
Physical
|
|
| Color | Black |
| Mounting | Alligator Clip (Included) |
|
Packaging Info
|
|
| Package Weight | 0.055 lb |
| Box Dimensions (LxWxH) | 6.55 x 4.3 x 0.65" |
