- Početna
- Video i foto oprema
- Baterije i punjači
- Anton Bauer Sony FX6 V Mount Micro Battery Slide Pro
Anton Bauer Sony FX6 V Mount Micro Battery Slide Pro
by Anton Bauer- 5 VDC Output via DC Connector
- Mounts Directly on Sony FX6
- For Standard- and Micro-Sized Batteries
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Anton Bauer Micro Battery Slide Pro for Sony FX6 (V-Mount)
Power your Sony FX6 via a V-mount battery with the Anton Bauer Micro Battery Slide Pro, which steps up the output voltage of your V-mount battery to the 19.5 VDC required to power your camera via its DC input power port. The battery bracket supports standard- and micro-sized batteries, and it attaches directly to the extension unit connector on the top of your camera, which provides an anchor point for compact and secure connection of the plate to the camera without requiring you to mount it on support rods.
The attachment point also acts as a hinge for the plate, allowing you to access the camera's BPU battery slot, allowing you to hot-swap V-mount batteries, and change the V-mount or BPU battery without turning off the camera. Each of the two P-Tap connectors provides unregulated power output from your V-mount battery for powering accessories, and multiple 1/4"-20 mounting holes allow you to attach accessories directly to the plate.
The quick-hinge design retains access to the camera's internal BPU battery compartment, allowing continuous shooting by hot-swapping internal and external batteries
The Battery Slide Pro plate steps up the output of a 14.4V battery to the required 19.5 VDC to power your camera via its DC-in port
The lightweight plate is small in size, for a small footprint when mounted on your camera, but it supports both standard- and micro-sized V-mount batteries
Anton Bauer 8375-0250 Specs
Power
Power Output |
D-Tap: VDC |
General
Camera Power Method |
Connector |
Connectors |
1 x Barrel Connector |
Plate Front / Battery Mount |
V-Mount |
Number of Battery Bays |
1 |
Accessory Mounting |
1/4"-20 Female |
Hot-Swap Support |
Yes |
Weight |
1 lb / 0.5 kg |
Packaging Info
Package Weight |
0.71 lb |
Box Dimensions (LxWxH) |
9.6 x 6.1 x 4.25" |