Aputure LS 600c Pro II
by AputureThe LS 600c Pro II has a new light engine design that increases output efficiency while maintaining power draw and color quality.
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- LS 600c Pro II Lamp Head
- Control Box
- Lighting Clamp
- Bownes Mount Protection Cover
- BM5645 Hyper Reflection
- Rolling case
- 7-Pin Weatherproof Head Cable (7.5m)
- Neutrik powerCON AC Power Cable (6m)
The LS 600c Pro II is a color-tunable point source COB light. With its Bowens mount it can accept modifiers to become a fresnel, a soft light, a projector or a hard open face par. Add its portable size, dual battery mounts, and CRMX/DMX/Bluetooth connectivity, and the LS 600c Pro II is the workhorse do-everything light. The original LS 600c Pro was already the leader in this category. The LS 600c Pro II improves upon its predecessor with nearly double the brightness, higher flicker-free performance, smoother dimming and IP54 weather resistance.
UP TO 85% BRIGHTER
The LS 600c Pro II has a new light engine design that increases output efficiency while maintaining power draw and color quality. A new formulation of LED emitters raises the output of the bare light by 35%. The new design is even better with modifiers, yielding 82% more light when used with the included Hyper-Reflector and 70-85% more when paired with the F10 fresnel.
NOW IP54 WEATHER PROTECTION
Head-to-toe IP54 dust and weather protection means the LS 600c Pro II can work in extreme environments. New seals on every connector and around components allow not only the lamphead but also the control box and cabling to be used outside in the rain.
APUTURE ECOSYSTEM COMPATIBLE
The LS 600 series are the popular workhorse lights of the Light Storm line. The LS 600c Pro II uses the same Bowens mount modifiers and can be controlled using Sidus Link. The light offers all of the features of its predecessor while improving output, flicker and dimming. It will slip into your kit with ease, requiring no learning curve.
IDEAL CUSTOMER PROFILES
Rental - Operators
These are lighting professionals who work in the ways of rental filmmakers, but also choose to own some of their own lighting equipment to rent together with their services to productions. They work with lighting exclusively. As needed they can augment their equipment with product from Rental Houses.
Small Production Teams
These are lighting professionals who own little or no equipment, instead ordering their equipment needs from Rental
Houses because of the size and scale of their lighting needs. Examples of these users are lighting technicians or high-end cinematographers who work as part of large teams and productions.
Rental Houses
These are facilities that exist to rent out lighting equipment to productions. They can be modest operations serving local areas up to large businesses providing to whole regions or countries.
Value Propositions
Up to 85% Brighter
New light engine design is dramatically brighter at same power draw.
The LS 600c Pro II has a new light engine design that increases output efficiency while maintaining power draw and color quality. A new formulation of LED emitters raises the output of the bare light by 35%. The new design is even better with modifiers, yielding 82% more light when used with the included Hyper-Reflector and 70-85% more when paired with the F10 fresnel.
Now IP54 Weather Protection
The LS600c Pro II provides IP54 weather protection.
Head-to-toe IP54 dust and weather protection means the LS600c Pro II can work in extreme environments. New seals on every connector and around components allow not only the lamphead but also the control box and cabling to be used outside in the rain.
Aputure Ecosystem Compatible
The LS600c Pro II works with Aputure accessories and Sidus Link.
The LS600 series are the popular workhorse lights of the Light Storm line. The LS600c Pro II uses the same Bowens mount modifiers and can be controlled using Sidus Link. The light offers all of the features of its predecessor while improving output, flicker and dimming. It will slip into client’s kit with ease, requiring no learning curve.
| CCT | 2,300K – 10,000K |
| CRI | ≥95 |
| TLCI | ≥98 |
| CQS | 96 |
| SSI (Tungsten) | 85 |
| SSI (D56) | 74 |
| TM-30 RF (Average) | 93 |
| TM-30 RG (Average) | 101 |
| Max Power Consumption | 720W |
| Max Power Output | 600W |
| Weather Resistance Rating | IP54 |
| Reflector Beam Angle | 45° |
| Operating Voltage (Two Batteries) | 12-33.6V |
| Operating Voltage DC | 48V / 15A |
| Operating Voltage PSU | 100V~240V/8A/50-60Hz |
| Operating Temperature | -20°C ~ 45°C / -4°F ~ 113°F |
| Storage Temperature | -40°C ~ 85°C / -40°F ~ 185°F |
| Control Methods | On-board, Sidus Link App, DMX/RDM, CRMX, etherCON |
| Firmware Upgradeable | Sidus Link, USB Drive |
| Wireless Range (Bluetooth) | ≤80m / ≤262.5ft |
| Screen Type | TFT |
| Cooling Method | Active Cooling |
| Lamp Head Fan Noise Levels Smart Mode | 32.9dBa |
| Lamp Head Fan Noise Levels High Mode | 32.9dBa |
| Lamp Head Fan Noise Levels Medium Mode | 30.0dBa |
| Lamp Head Fan Noise Levels Silent Mode | 24.0dBa |
| Control Box Noise Level All Modes | 28.0dBa |
| WEIGHT | |
| Lamp Head With Yoke | 5.9 kg / 13.0lbs |
| Control Box | 5.4 kg / 11.9lbs |
| DIMENSIONS | |
| Lamp Head With Yoke | 45.2 x 26.7 x 15.0cm 17.8 x 10.5 x 5.9in |
| Control Box | 36.6 x 19.7 x 15.6cm 14.4 x 7.8 x 6.1in |

















