Barco ClickShare HDMI IN to USB-C convertor kit

by Barco

Dostupnost: Isporuka 7-10 dana

SKU

R9861581

Add an HDMI source to your ClickShare CX-50 Gen2 conferencing base unit with this HDMI In to USB-C Converter Kit from Barco.

162,50 € 130,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Barco HDMI In to USB-C Converter Kit for ClickShare CX-50 Gen2

Opis

Add an HDMI source to your ClickShare CX-50 Gen2 conferencing base unit with this HDMI In to USB-C Converter Kit from Barco. This dongle allows you to input and share video from an HDMI source for wireless sharing or for wired RoomDock mode. The converter also features a USB-C input, so there will still be a USB-C port available. Both modes need to be enabled on your CX-50 for use. The HDMI input supports up to UHD 4K30 resolution.

NOTE: The USB-C port on the converter is not DP compatible, so cannot be used to switch between HDMI and DP modes.

Specifikacije

Inputs/Outputs
System Connection	USB-C (Manufacturer Unable to Confirm USB Interface) with Addition Pass-Through Port
Video I/O	Input
	1x HDMI (Unspecified Signal) Female
	1x USB-C Female
Format Support
Video Resolution	HDMI Input
	3840 x 2160 up to 30 fps
General
Dimensions	7.1 x 2.4 x 1.2" / 18 x 6 x 3 cm
Weight	3.5 oz / 100 g