Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR
by Blackmagic DesignSupports DCI 8K, 8K, DCI 4K, UHD, 2K, HD
Accepts Third-Party Calibration Probes
12G-SDI I/O / DisplayPort/USB-C D.P. Out
2 x Selectable, On-Screen Scopes
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR Converter
- 4 x Rubber Foot
The Teranex Mini SDI to DisplayPort 8K HDR Converter from Blackmagic Design provides an advanced 8K monitoring solution. Its DisplayPort outputs enable you use pro monitors like the Apple Pro Display XDR as part of your on-set or post-production monitor setup. The four 12G-SDI inputs support 4K signals independently or an 8K input signal together, either DCI 8K or 8K video split into four UHD signals. It can use third-party calibration probes such as the SpectraCal C6, X-Rite i1 Display Pro, or the Klein K10-A probe to accurately align connected displays for precise color. The built-in, color LCD screen displays not only the video image, but it can also display two on-screen scopes selected from WFM, Parade, Vector, and Histogram options.
The 8K is available on the four SDI outputs, via the single USB-C DisplayPort output, or the two full-size DisplayPort outputs for monitors that support quad HDMI inputs. If you are not connected to an 8K monitoring solution, a built-in down-converter enables you to display the 8K input video on an Ultra HD or HD monitor. This unit will convert between 2SI and square division automatically. The Mini SDI to DisplayPort 8K HDR solution supports a variety of HDR workflows including PQ and HLG, and it supports both Rec. 202 and Rec. 709 as well as 100% of the DCI-P3 format. Two independent 3D LUTs can be loaded at the same time, and you can switch between them from the unit's front panel. In addition to the LCD video screen, the front of the Teranex Mini SDI to DisplayPort 8K HDR Converter features a rotating selection knob and six front-panel buttons for navigating. Use the included rubber feet for desktop mounting or support the converter with the separately available Teranex Mini Rack Shelf.
Note:
- The USB-C port is for DisplayPort over USB-C. Note that this requires a certified DisplayPort over USB-C cable, which is different from a generic USB-C cable or a Thunderbolt cable.
Features
SDI to DisplayPort Conversion
Converts SDI sources to DisplayPort, supporting up to DCI 8K60 input
Quad-Link 12G-SDI
Quad-link 12G-SDI inputs with loop outs
SDI & DisplayPort Outputs
Quad-link 12G-SDI output, one USB-C DisplayPort output, and two full-size DisplayPort outputs
Pro Monitor Compatibility
Compatible with pro monitors like the Apple 32" Pro Display XDR
Calibration Tool Compatibility
Supports third-party calibration probes like the SpectraCal C6, X-Rite i1 Display Pro, and the Klein K10-A for accurate alignment on connected displays
HDR Support
Supports SDR and both HLG or PQ HDR via the SDI and DisplayPort outputs
Live Scope Overlays
Overlay up to two live scopes on the monitor
3D LUT Support
Supports 3D, 10-bit LUTs with two front-panel control buttons
Video Input Connectors | 4 x BNC (12G-SDI) |
Input Video Format | SDI (4:4:4/4:2:2 RGB, YUV) DCI 8K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps 8K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 4K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps UHD 4K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 2K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 2KPsF: 23.98/24/25/29.97/30 fps 1080p: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps 1080PsF: 23.98/24/25/29.97/30 fps 1080i: 50/59.94/60 fps 720p: 50/59.94/60 fps |
Audio Input Connectors | None |
Embedded Audio Input | SDI: 16-Channel (per Input) |
Video Output Connectors | 4 x BNC (12G-SDI) (Loop Output) 2 x DisplayPort (DisplayPort 1.4) 1 x USB Type-C (DisplayPort 1.4) |
Output Video Format | SDI (4:4:4/4:2:2 RGB, YUV) DCI 8K: 25/29.97/30/47.95/48/50/59.94/60 fps 8K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 4K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps UHD 4K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps UHD 4K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 2K: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps DCI 2KPsF: 23.98/24/25/29.97/30 fps 1080p: 23.98/24/25/29.97/30/47.95/48/50/59.94/60 fps 1080PsF: 23.98/24/25/29.97/30 fps 1080i: 50/59.94/60 fps 720p: 50/59.94/60 fps |
Audio Output Connectors | 2 x RCA Analog |
Output Audio Format | Analog: 48 kHz / 24-Bit |
Embedded Audio Output | SDI: 16-Channel (per Output) |
Video Standard Compliance | SMPTE 259M/292M/296M/372M/424M-B/425M-A/425M-B/ST-2081-1/ST-2081-10/ST-2082-1/ST-2082-10 |
Other I/O | 1 x RJ45 Control 1 x USB Type-C |
Display Size | 2.2" |
OS Compatibility | Windows 10 macOS 10.14 macOS 10.1 or Later |
Power Connector | 1 x IEC C14 Input |
Power Consumption | Device: 100 to 240 VAC (35 W) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Storage Temperature | -4 to 140°F / -20 to 60°C |
Operating Humidity | 0 to 90% |
Dimensions | 8.27 x 1.73 x 6.93" / 21.01 x 4.39 x 17.6 cm |
Weight | 2.6 lb / 1.18 kg |
Warranty Length | Limited 1-Year Warranty |
Package Weight | 2.985 lb |
Box Dimensions (LxWxH) | 11.4 x 8.6 x 3.5" |