Početna
Dronovi
Matrice oprema
DJI Manifold 3 Accessory Kit (Matrice 4 Series)

DJI Manifold 3 Accessory Kit (Matrice 4 Series)

by DJI

Dostupnost: Isporuka 14-20 dana

SKU

CP.EN.00000698.01

Connects and secures Manifold 3 to the Matrice 4D Series aircraft.

46,25 € 37,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Connector (Matrice 4D) × 1
Coaxial Cable (Matrice 4D) × 1
Connector Screw (Manifold 3) × 6
Coaxial Cable Screw (Manifold 3) × 2
Phillips Screwdriver × 1
Hex Key × 1

Opis

Connects and secures Manifold 3 to the Matrice 4D Series aircraft.

Tips:

1. When installing the coaxial cable, ensure the cable screws are fully tightened to prevent disconnection or reduced water resistance due to flight vibrations.

2. Use the hex key to tighten the screws on the connector to prevent screws from loosening due to flight vibrations.

3. The hex key can also be used to press the Manifold 3 reset button to restore factory settings.

Compatibility: