- Početna
- Pro audio
- Bubica (Lavalier) mikrofoni
- DPA SC4063-WM d:screet Omni Mic, Lo-Sens & DC, White, MicroDot
DPA SC4063-WM d:screet Omni Mic, Lo-Sens & DC, White, MicroDot
by DPAOmnidirectional, Low Sensitivity, White, Requires Adapter
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- DPA Microphones 4063 Omnidirectional Miniature Low-Sensitivity and Low-DC Microphone (White)
- High Boost Protection Grid
- Soft Boost Protection Grid
The DPA 4063 is a miniature omnidirectional lavalier microphone designed for use in performance and theatrical applications. The miniature lavalier features a condenser element with a frequency and sensitivity response that will accurately reproduce audio signals from the human voice and instruments. The capsule is designed with a double-vent protection system and moisture-resistant materials inside the capsule, which ensure maximum protection from humidity and moisture caused by perspiration, makeup, etc.
The 4063 includes interchangeable capsule protection grids that alter the signal character of the microphone. A "High Boost" capsule creates a peak at 12kHz, creating an airy texture to audio signal. The "Soft Boost" capsule creates a subtle boost between 8-20kHz, enhancing signal presence. With a SPL rating of 138dB, the microphone is more than capable of reproducing transient (peaking) audio before clipping. The 4063 is powered via +48V phantom power and features a MicroDot output connector, compatible with various wireless microphone transmitters or power supplies with standard XLR outputs.
Transducer | Pre-Polarized Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | Soft Boost Grid: 20 Hz-20 kHz +/- 2 dB, 3 dB soft boost at 8 Hz - 20 kHz High Boost Grid: 20 Hz-20 kHz +/- 2 dB, 10 dB boost at 12 kHz |
Dynamic Range (Typical) | Not Specified by Manufacturer |
Signal-to-Noise Ratio | Typical 35 dB (max. 38 dB) |
Maximum Input Sound Level | 138 dB SPL Before Clipping |
Power Requirements | +48 V |
Output Impedance | 30 to 40 Ohm |
Output Connectors | MicroDot |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | Cable Length: 5.9' (1.8 m) |
Weight | 0.26 oz (7.5 g) including Cable and MicroDot |