DPA SCO71F00-H d:screet Omni Mic, Heavy Duty, Presense Boost, Lo-Sens, Beige, Mi
by DPAOmnidirectional Mic Capsule, For Speech and Vocals, 100 Hz to 15 kHz Frequency Response, Resistant to Moisture and Temperature, Reinforced Cable Relief, Low Noise Floor and High SPL, Carry Case is Included
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- DPA Microphones Omnidirectional Microphone
- Carry Case
The beige d:screet Heavy Duty 4071 Omnidirectional Microphone with Low-cut, Presence Boost and MicroDot Connector from DPA Microphones is designed for use in performance applications to capture audio for broadcasters, TV studios, news anchors, stage plays and more. It features a 4071 omnidirectional condenser microphone with low-cut and presence boost equalization for voice built into the capsule. This provides an increase in headroom when using the built-in pre amp with wireless system.
The heavy duty 4071 omnidirectional microphone features a frequency range of 100 Hz to 15 kHz and is resistant to moisture and extreme temperature changes and humidity. This heavy duty microphone is built with a reinforced cable relief to withstand the constant twists, bends, pulls that are part of everyday use. The 4071 miniature microphone has a low noise floor and can handle high SPLs. A carry case is included.
- Omnidirectional Pattern
- The omnidirectional condenser mic polar-pattern does not need to be aimed directly at the sound source when recording. This offers more detail and a natural sounding sonic character when recording in various environments.
- Built In Boost to Compensate for Loss
- An important consideration when placing a microphone on the body, especially on the chest, is that the frequency range of the consonants is damped, resulting in poor intelligibility. The 4071 has a built-in boost to compensate for this loss.
- A Durable Package
- The 4071 miniature mic is designed to withstand the toughest of conditions. A double vent protection system provides a greater resistance to humidity and sweat. The microphone features a reinforced cable relief, gold treated diaphragm, and microphone housing, plus a kevlar reinforced cable.
| Polar Pattern | Omnidirectional |
| Principle of Operation | Pressure |
| Cartridge Type | Pre-polarized condenser element with vertical diaphragm |
| Frequency Range | 100 Hz to 15 kHz with typical 5 dB soft boost at 4 to 6 kHz, ± 2 dB |
| Sensitivity | 6 mV/Pa at 1 kHz; -44.4 dB re. 1 V/Pa (nominal, +/-3 dB) |
| Equivalent Noise Level | A-Weighted: Typical: 26 dBA re. 20 µPa Maximum: 28 dBA ITU-R BS.468-4: Typical: 38 dB Maximum: 40 dB |
| S/N Ratio | 68 dBA, 1 kHz at 1 Pa (94 dB SPL): |
| Total Harmonic Distortion (THD) | <1% THD up to 123 dB SPL peak <1% THD up to 120 dB SPL RMS sine |
| Dynamic Range | Typical 97 dB |
| Maximum Sound Pressure Level (SPL) | Peak Before Clipping: 144 dB |
| Output Impedance | 30 to 40 Ω |
| Cable Drive Capability | Up to 984' (300 m) |
| Connector | MicroDot |
| Temperature Range | -14 to 113°F (-10 to 45°C) |
| Relative Humidity | Up to 90% |
| Cable Length | 5.9' (1.8 m) Cable Diameter: 0.06" (1.6 mm) |
| Dimensions (Ø x L) | 0.2 x 0.67" (5.4 x 17 mm) |
| Weight | 0.32 oz (9 g) |
| Packaging Info | |
|---|---|
| Package Weight | 1.0 lb |
| Box Dimensions (LxWxH) | 6.0 x 6.0 x 2.0" |
- Novo
- Novo
