- Početna
- Video i foto oprema
- Baterije i punjači
- Dynacore DS-U95B 6400mAh D-tap USB BP/U60 Battery
Dynacore DS-U95B 6400mAh D-tap USB BP/U60 Battery
by DynacoreIntelligent Li-ion battery applies to SONY HDV camera,such as PMW-EX1R/EX3/F3/100/200.
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
Dynacore DS-U95B 6400mAh D-tap USB BP/U60 Battery
Dynacore DS-U95B is a 14.8V, 95Wh Li-ion DV battery that completely compatible with SONY PMW-EX1, EX1R, EX3, F3, 100, 200, without DC cable, and can display remaining power info on cameras.
The battery offers a D-tap DC socket for extension power output, and a 5V/1A USB socket for mobile devices (cell phone etc) charging.
The 4-level LED indicator can give you a quick view of remaining power before using, and the strong housing, intelligent circuit will protect the battery from shocking, abnormal current, voltage and temperature.
1.High-power Li-ion battery with the capacity up to 95Wh.
2.Intelligent Li-ion battery applies to SONY HDV camera,such as PMW-EX1R/EX3/F3/100/200.
3.Built-in 4-level LED power indicator shows accurately the remaining battery capacity.
4.Built-in D-Tap connector for camera light.
5.USB 2.0 5V/1A output.
6.Built-in multiple protective circuit design to prevent over charge, over discharge,over current, short circuit, etc.
Build-in D-tap DC Output Socket
A D-tap DC output socket is equipped on the side of DS-U95B battery, for DC14.8V (Nominate) connection.
You can connect on-camera LED light, monitor or wireless transmitter on the D-tap socket, and get power simultaneously with camera.
The Max power from D-tap is 50W, 3.5A.
Build-in 5V/1A USB Socket
Use DS-U95B as Power Station to your cell phone! It’s rather a fantastic function
to have a USB socket on the DV battery!
Connect your smart phone or pad to the USB socket, press the “Check” button, and then the DS-U95B starts to output 5V/1A power to charge your devices!
Model |
DS-U95B |
Compatibility |
SONY BP-U60 |
Voltage |
14.8V |
Capacity |
6400mAh/95Wh |
Max Output |
55W,3.5A |
Dimension |
42(mm)x 70(mm) x 95(mm) |
Weight |
0.42Kg |
Applicable Camera |
SONY PMW-EX1/3/F3, PMW100/200,PMW-EX280, PXW-FS7, PXW-X160/180, etc. |
Operation Instruction
1. Put the battery into camera slot along the arrow direction as indication in Fig.4 and lock it.
2. Remove the serum cap for D-TAP output and insert the plug for flashlight.
3. Press the power button for 3 seconds and USB output (Fig.1) is activated for charging portable equipment, such as mobile phone and Pad.
Note: USB output will not be deactivated even when the power button is pressed during the charging process.
USB output will be automatically deactivated under the following circumstances:
①. Equipment is fully charged;
②. Equipment is removed during the charging process;
4. Cover the serum cap after use for dust prevention.
- Dynacore D-USB PowerTap to USBRegularna cijena 31,50 € * Najniža cijena u zadnjih 30 dana Akcijska cijena 25,25 € 20,20 €