- Početna
- Pro audio
- Studijski mikrofoni
- Neumann KM 184 mt Octo Set
Neumann KM 184 mt Octo Set
by Neumann8 x KM 184 Microphones
8 x Foam Windscreens
8 x Stand Adapters and Mic Pouches
Small-Diaphragm Condenser Elements
Uniform Cardioid Polar Pattern
Uncolored, High-Gain Output Signals
Ultralow Self-Noise
Transformerless Circuitry
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- 8 x Neumann KM 184 MT Microphone (Matte Black)
- Neumann WNS100 Windscreen 45mm (Black)
- Neumann SG21/17MT Swivel Mount with Clamp for Microphones 21mm in Diameter
- 8 x Microphone Pouches
Ideal for orchestral recording and live stage applications, the matte black Neumann KM 184 MT Octo Set features eight KM 184 MT small-diaphragm cardioid condenser microphones, each with a foam windscreen, a stand adapter, and a mic pouch. The KM 184 MT offers premium Neumann sound that's both open and musical without imparting its own sonic signature, making it a popular choice for solo instruments and ensembles where microphone transparency is a top priority.
The transformerless circuitry and balanced output result in high-output gain with an ultralow noise floor. The mic's uniform cardioid polar pattern provides a targeted pickup area with no off-axis coloration while handling SPLs up to 138 dB, allowing confident close-miking of instruments. As with true condenser mics, the KM 184 is powered via +48V phantom power.
Cardioid Polar Pattern
The cardioid polar pattern effectively isolates signal source.
KM 100-Based Output Stage
The KM 184 features the same output stage electronics as the KM 100. Transformerless circuitry and quiet balanced output design ensure a clean, high-gain output signal without any coloration. The KM 184 is powered via +48V phantom power, and its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 184 can handle sound-pressure levels up to 138 dB, allowing fairly close miking of instruments.
Compact Rugged Construction
The slim design and rugged construction allow easy microphone placement while remaining roadworthy.
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Cardioid |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 138 dB SPL |
Impedance | 50 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 15 mV/Pa at 1 kHz into 1 Kilohms |
Signal-to-Noise Ratio | 72 dB CCIR 81 dB A-Weighted |
Equivalent Noise Level | 22 dB CCIR 13 dB A-Weighted |
THD | 0.5% |
Output Connectors (Analog) | 1 x XLR 3-Pin |
Operating Voltage | 48 V ± 4 V |
Operating Current Consumption | 3.2 mA |
Dimensions | ø: 0.87 x L: 4.21" / ø: 22 x L: 107 mm |
Weight | 2.82 oz / 80 g |
Package Weight | 0.55 lb |
Box Dimensions (LxWxH) | 9.85 x 3.2 x 2.5" |