Neumann MCM 100
by Neumann
Dostupnost:
Isporuka 14-20 dana
SKU
SEN-008695
XLR Output Stage for KK 14 MCM Capsule
For Wired Operation on XLR Mic Input
Phantom Powered: 48V
Locking 3.5mm TRS Female Input Connector
3-Pin XLR Male Output Connector
113,75 €
91,00 €
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Neumann MCM 100 XLR Output Stage Module for MCM Microphone System
Part of the modular Miniature Clip Mic (MCM) system, the Neumann MCM 100 is an in-line output stage module for the KK 14 capsule. It enables you to run the capsule on +48V phantom power from a traditional mic preamp when plugging the mic into a mixing board via a balanced XLR cable.
The MCM 100 is equipped with a 3.5mm TRS female input connector and a 3-pin XLR male output connector. The AC 31 cable (available separately) is required to connect the KK 14 capsule to the output stage module.
| Connector 1 | Input: 1/8" / 3.5 mm TRS Female, Locking |
| Connector 2 | Output: 3-Pin XLR Female |
| Rated Impedance | 50 Ohms |
| Rated Load Impedance | 1000 Ohms |
| Power Supply | 48 V, ±4 V (P48, IEC 61938), Phantom Power |
| Current Consumption | 3.5 mA |
| Dimensions | Diameter: 0.9" / 22 mm Length: 3.0" / 77 mm |
| Weight | 3.4 oz / 96 g |
Izdvojeni proizvodi
- Novo
- Novo
