Saramonic SmartRig+ Di (Two Channel Mic/Instruments Interface iOS )

by Saramonic
Dostupnost: Dostupno
SKU
SAR-SmartRig+Di

2 x 1/8" Mic Inputs
2 x XLR Mic Inputs
2 x 1/4" Guitar Inputs
Lightning Output Connector

Regularna cijena 189,25 € * Najniža cijena u zadnjih 30 dana Akcijska cijena 112,81 € 90,25 €
-40%

Sadržaj pakiranja

  • Saramonic SmartRig+ Di, Two-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices

The SmartRig+ Di from Saramonic is a two-channel audio interface that allows you to connect professional microphones or guitars to your iPhone, iPad, and iPod touch device. With a lightning connector output, the interface can be used to record stereo sound or music to your iOS portable device.


The SmartRig+ Di provides 48V phantom power for condenser microphones and is equipped with two XLR inputs, two 1/8" inputs, and two 1/4" inputs, and an 1/8" headphone output for real-time monitoring. There are two gain-control thumbwheels that make it easy to set levels for each channel separately.

Frequency Response 20 Hz to 20 kHz +/-0.5 dB
Total Harmonic Distortion (THD) Less than 0.01% @ 1 kHz, -30 dBu input
Signal to Noise Ratio 78 dB @ 1 kHz, -30 dBu input
Sample Rate 44.1 kHz or 48 kHz
Input 1 1 x XLR mic input
1 x 1/4" / 6.35 mm guitar input
1 x 1/8" / 3.5 mm input
Input 2 1 x XLR mic input
1 x 1/4" / 6.35 mm guitar input
1 x 1/8" / 3.5 mm input
Output Lightning connector output cable
Headphone Out 1/8" / 3.5 mm jack
Gain + 25 dBu to - ∞
Phantom Power 48 V power supplies
Power Requirements 1 x 9 V alkaline or lithium battery
Dimensions (L x W x H) 4.7 x 1.6 x 1.6" / 120.0 x 40.0 x 40.0 mm
Weight 4.6 oz / 130.0 g
Izdvojeni proizvodi