- Početna
- Pro audio
- Mikrofonski dodaci
- Saramonic SmartRig+ (Two Channel Mic/Instruments Interface)
Saramonic SmartRig+ (Two Channel Mic/Instruments Interface)
by SaramonicThe Saramonic SmartRig+ is a portable microphone/guitar interface for recording professional quality audio
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Saramonic SmartRig+
The SmartRig+ makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels allow you to connect and control gain on multiple microphones or guitars at the same time. The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4" (6.35mm) guitar inputs, and two 1/8" (3.5mm) jack inputs for connecting any instrument or microphone. Outputs to a standard 1.8" 3.5mm cable for use with, smartphones, cameras and other devices.
Provides 48V phantom power for microphones, and includes a 3.5mm headphone output for real-time sound monitoring. The two gain control thumbwheels make it easy to set precise levels.Toggle between Mono and Stereo output modes as necessary. Powered by one 9V battery.
Channels
Two Independent Channels
Inputs
Two XLR Microphone Inputs, Two 3.5mm (TRS) Microphone Inputs, Two 1/4" Guitar Inputs
Outputs
Output switch for smartphone (TRRS) or Camera/Camcorder/Recorder (TRS); 3.5mm Headphone Output Jack for Monitoring
Phantom Power
+48v Phantom Power Switch
Mono/Stereo
Mono/Stereo Toggle Output Switch
Frequency Response | 20Hz to 20kHZ(+/-0.5dB) |
Distortion | Less than 0.01% @ 1 kHz, -30dBu input |
Signal to Noise Ratio | 80 db @ 1kHz, -30 dBu input |
Gain | +20 dB to Infinity |
Power Requirements | One 9V Alkaline or Lithium |
Dimensions | L 4.7" x W 1.6" x H 1.6" (12 x 4 x 4 cm) |
Weight | 4.6 oz. (130g) |