Sennheiser MKH 416-P48U3

Dostupnost: Dostupno

SKU

SEN-001511

Designed for recording audio in film, radio, and television the MKH 416 from Sennheiser is a short shotgun interference microphone optimized for outdoor applications.

1.040,75 € 832,60 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

1 x Sennheiser MKH 416 P 48

Opis

Designed for recording audio in film, radio, and television the MKH 416 from Sennheiser is a short shotgun interference microphone optimized for outdoor applications. It offers excellent directional control in a compact design with high consonant articulation and rejection of feedback. The unit is highly immune to humidity because of its RF condenser design. It operates as a hypercardioid at low and medium frequencies with a lobar pattern above 2 kHz.

Pressure gradient receiver with short interference tube
Employs RF-technology to control residual microphone noise. Optimizing the transducer's acoustic impedance results in a further improvement in low noise performance
The RF-design yields low noise levels and high immunity to humidity and moisture
The comparatively low RF-voltage across the elements of the transducer also eliminates arcing and DC-bias creeping currents
Hypercardioid at low and medium frequency, above 2 kHz approaches lobar pattern
Very low inherent self-noise
High sensitivity
Transformerless and fully floating balanced output
Rugged, suitable for adverse climatic conditions
Matt black all-metal body
Increased directivity

Specifikacije

Transducer	Pressure Gradient/Interference Receiver Condenser
Polar Pattern	Low, Mid: Hypercardioid Above 2 kHz: Lobar
Frequency Response	40 to 20,000 Hz
Dynamic Range (Typical)	117 dB
Signal-to-Noise Ratio	81 dB
Maximum Input Sound Level	130 dB, (@ 1 KHz)
Maximum Input Sound Level	Sensitivity 25 mV/Pa +/- 1dB
Power Requirements	Phantom Power 48 v, (± 12 v)
Output Impedance	Nominal Impedance: 25 Ohms
Output Impedance	Minimum Terminating Impedance: 800 Ohms
Output Connectors	XLR-3M Type
Pad	None
Low Frequency Roll-Off	None
Applications	Film, Radio and Television, Especially for Outside Broadcast Applications.
Dimensions (L x Diam)	9.84 x 0.74" (250 x 19 mm)
Weight	5.82 oz (175 g)

Izdvojeni proizvodi