SmallRig Half Cage for BMPCC 6K Pro 3665
by SmallRigDedicated half cage for BMPCC 6K Pro, simple and lightweight
Multiple mounting points: 1/4''-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoe, NATO rail
Fits seamlessly into the camera and maintains access to buttons, card slots, and holes
Three-point locking ensures stability and prevents twist
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- 1 x Cage
- 3 x 1/4''-20 Screw
- 1 x Allen Wrench
SmallRig Half Cage for BMPCC 6K Pro / 6K G2 3665 provides accessory mounting points to facilitate shooting. It secures the camera via one 1/4" screw on the top and two on the bottom to prevent twists. On its top there are 1/4''-20 threaded holes for Monitor Mount BSE2294, ARRI 3/8" -16 locating holes for ARRI Locating Handle 2165, cold shoes for microphones, LED lights, SSD Mount 3272, etc. Its left side comes with a NATO rail that supports Rotating NATO Handle 3260 and NATO Handle 2270, and 1/4''-20 threaded holes that support HDMI & USB-C Cable Clamp 3271 to ensure stable data transmission; its right side fits the original camera handle. The front of the cage features one 1/4''-20 hole at the top and one 1/4''-20 hole at the bottom for attaching Rod Clamp 3276. The baseplate includes 1/4''-20 and 3/8"-16 threaded holes for Quick Release Plate 1280 and 2146 as well as an extended quick release plate of DJI RS 2, and an Allen Wrench for easy access. Embedded silicone cushions can prevent scratches. Besides, there are holes to install a shoulder strap or wrist strap. The cage fits seamlessly into the camera and maintains access to buttons, card slots, and holes.
Work With
- Blackmagic Design BMPCC 6K Pro
- Blackmagic Design BMPCC 6K G2
| Product Dimensions | 149.5 x 98.5 x 140.5mm |
| Package Dimensions | 168 x 159 x 87mm |
| Net Weight | 227g±5g |
| Package Weight | 334g±5g |
| Material(s) | Aluminum Alloy, Stainless Steel, Silica Gel |
- Novo
