SmallRig Magic Arm Support (11") 5309
by SmallRig
Dostupnost:
Dostupno
SKU
SR-5309
Adjustable Ball Heads on Both Ends
1/4"-20 Anti-Twist Screw on Each End
31,50 €
25,20 €
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- SmallRig Magic Arm Support with 1/4"-20 Screws (11")
- Allen Wrench
Featuring a ball head at each end, the 11" long Magic Arm Support with 1/4"-20 Screws from SmallRig can be used to mount an accessory weighing up to 3.3 lb onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum arm features 1/4"-20 anti-twist screws with retractable pins on either end.
Each screw mount features padding to prevent your equipment from twisting and scratching. Both ball heads and the center joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
| Load Capacity | 3.3 lb / 1.5 kg |
| Top Mount |
1/4"-20 Male With Retractable Anti-Twist Pin
|
| Bottom Mount |
1/4"-20 Male With Retractable Anti-Twist Pin
|
| Points of Articulation | 3 |
| Material of Construction | Aluminum Alloy |
| Maximum Length | 6.3" / 159 mm |
| Width | 1.0" / 26.6 mm |
| Depth | 2.3" / 59.5 mm |
| Weight | 9.3 oz / 265 g |
Izdvojeni proizvodi
- Novo
- Novo
- Novo
