SmallRig Magic Arm with Crab-Shaped Clamp (7") 5310
by SmallRigAdjustable Ball Heads on Both Ends
1/4"-20 Anti-Twist Screw on One End
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- SmallRig Magic Arm with Crab-Style Clamp (7")
- Allen Wrench
Featuring a ball head at each end, the 7" long Magic Arm Support with 1/4"-20 Screws from SmallRig can be used to mount an accessory weighing up to 3.3 lb onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum arm features a 1/4"-20 anti-twist screws with retractable pins on either end.
The screw mount and interior clamp jaws feature padding to prevent your equipment from twisting and scratching. The clamp can clamp onto a stand, pipe, or pole with a 0.6 to 1.6" diameter. Both ball heads and the center joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
| Load Capacity | 3.3 lb / 1.5 kg |
| Top Mount | Jaw Clamp |
| Bottom Mount |
1/4"-20 Male With Retractable Anti-Twist Pin
|
| Accessory Mounting |
1x 3/8"-16 Female Thread
|
| Jaw Opening |
0.6 to 1.6" / 15 to 40 mm
|
| Points of Articulation | 3 |
| Material of Construction |
Aluminum Alloy, Stainless Steel
|
| Maximum Length | 5.3" / 134 mm |
| Width | 5.3" / 134 mm |
| Depth | 1" / 25 mm |
| Weight | 0.7 lb / 322 g |
- Novo
