SmallRig Suction Cup Mounting Support for Action Cameras 4347

Even in the unlikely case of silicone suction cup leakage due to severe vibration, the magnets can pull the whole mounting support to the surface of an iron car (within the load capacity of 0.35kg / 0.8lb in a dynamic shooting scene with a flat road when maximum speed does not exceed 120km/h or 74mph), effectively avoiding the risk of falling off caused by the leakage of a silicone suction cup.

With the dual-material design, this item can be attached to any dry, flat, and smooth surfaces, including, but not limited to, iron doors, railings, iron kitchenware, sports equipment, etc. The package includes an all-in-one magnetic suction cup, a rotating adapter, an action camera mount, and a mobile phone clamp.

The 1/4"-20 screw on one end allows attaching an action camera, LED video light, etc. It can also be used with a mobile phone clamp to attach mobile phones with a width of 56-86mm / 2.2-3.4in and a thickness of less than 9mm / 0.4in.

The included action camera mount supports GoPro Cage 3084C / 3083C, Frame for Insta360 X3 4088B, and DJI Action 4 Cage 4119B. Similar products from SmallRig include 3566, 4193, and other camera mount supports.
 
Note:
1. Do not use on the following surfaces: painted surfaces, marble, textured wallpaper, diatom mud walls, unpainted wood, frosted glass, and other rough or textured surfaces.
2. Do not use in the following scenarios: surfing, skiing, or other high-impact sports;
3. Avoid prolonged exposure to water or rain;
4. Do not clamp a mobile phone while shooting dynamic scenes;
5. Do not use it with a selfie stick for dynamic photography;
6. Recommendation: Attach a lanyard when using it on the car, control the speed below 120km/h (74mph), check the suction force before use and every hour;
7. Suitable for dry, flat, smooth, and clean iron surfaces;
8. Applicable temperature range: -20°C to 60°C / -4 to 140°F.