Teradek COLR Duo 3D Lut 33pt Dual HD-SDI with WiFi
by TeradekCOLR Duo is a wireless camera control bridge and 2 channel LUT box, with support for 2 independent 33pt 3D LUTs. COLR Duo integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- 1 x Power Supply Unit 2-pin Connector to 18W AC Adapter(Int) - 6 ft. Cable
- 2 x SDI - BNC to BNC Cable, 10in
- 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
- 1 x Mini-USB to USB - 18 in. Cable
- 1 x Quickstart Guide - COLR
- 1 x Free Trial Code for Pomfort LiveGrade Pro
The Teradek COLR Duo Camera Control Bridge/LUT Box is a wireless camera control bridge and 3D LUT box. This alternative to the Teradek COLR offers two 3G-SDI outputs with independent 33-point 3D LUTs. 3G-SDI signals are input to the COLR Duo and output with a LUT applied, providing a way for DITs and colorists to match looks across different cameras and different display devices (monitors, tablets, etc.). This compact device enables storage of multiple CDL and 3D LUT presets, integration with Pomfort LiveGrade Pro, and monitor calibration with SpectraCal's CalMAN software. Log and RAW signals can be live graded using Pomfort LiveGrade Pro (free trial available) and output via the COLR Duo. The COLR Duo has a built-in video scaler, a deinterlacer, a frame rate converter, and custom OSD tools. It also features a test pattern generator for calibration, an OLED display, joystick navigation, and a WebUI for look management, camera control, and network configuration. The COLR Duo integrates with Teradek's Connected Set, designed to provide a seamless workflow using multiple components such as the Bolt, Cube, and LOKR.
- Each of the two 3G-SDI outputs can be configured independently, enabling the use of LUTs specific to each display device
- Multiple presets, combining CDL 1D and 33-point 3D LUTs (with 10-bit color), can be stored for quick conversion or custom looks
- Integrates with Pomfort LiveGrade Pro, offering color grading over Wi-Fi, Ethernet, or USB
- Converts RAW and Log signals for live monitoring, and enables wireless control for Ethernet-enabled cameras, including ARRI, Panasonic, Phantom, as well as working with FoolControl for RED cameras
- Seamlessly integrates into Teradek's Connected Set workflow
| Video Input | 1 x 3G/HD/SD-SDI BNC |
| Video Outputs | 2 x 3G/HD/SD-SDI BNC |
| Audio Input/Output | Embedded SDI audio |
| Supported Video Resolutions | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i 50/59.94/60 1080PsF 23.98/24/25 720p 50/59.94/60 576i 50 480i 59.94 |
| Color Sampling | SDI Input/Output: 10-bit YCbCr 4:2:2 |
| Video Processing | Test pattern generator for calibration CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) 2 x Video outputs with two independent LUT pipelines each |
| Protocol Support | Network Protocols: TCP/IP, UDP, HTTP, DHCP Software/Platform Integration: Pomfort LiveGrade, SpectraCal CalMAN, and more |
| Interfaces | HTTP: WebUI for configuration and control Configuration Interface: OLED display/joystick navigation Switches: On/Off USB Interface: Powered USB 2.0 host port |
| Network | Ethernet: 10/100/1000 BASE-T Gigabit Wi-Fi: 2.4/5 GHz 802.11 ac/a/b/g/n MiMO RF Channel Selection/3-Mode Auto: 2.4 or 5 GHz, Auto (2.4 GHz only), Auto (5 GHz only) Configurable to specific channels |
| Power | 2-pin LEMO power input Nominal Power Consumption: 8 W, 7 W (no Wi-Fi) Auxiliary Power Input: 6-28 VDC |
| Dimensions | 2 x 1 x 4" (5 x 3 x 10 cm) |
| Weight | 6 oz (170 g) |
- Novo
- Novo
- Novo
