Tilta 15mm baseplate for Sony FS7 camera
by TiltaVCT Style Baseplate with Shoulder Pad
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Tilta BS-T10 Quick Release Baseplate for Sony FS7
- 2 x 7.8" 15mm Rods
Specifically designed to work with your FS7 camera, the Tilta BS-T10 Quick Release Baseplate for Sony FS7 allows you to mount your camera on a VCT-type quick-release-style tripod adapter. The baseplate allows you to go from tripod mounted to handheld with just the flick of the release lever on an optional VCT adapter plate. The baseplate features a built-in shoulder pad so the camera maintains its hand holdable function and adds LWS rod support for accessories. ARRI compatible rosettes are built-into each side of the baseplate, allowing you to use optional ARRI compatible handgrips.
Front and rear mounted LWS rod clamps allow you to use the included support rods for optional rod-mounted accessories such as a matte box or a follow focus. You can mount the rods in the rear clamps to support optional batteries, off-board recorders, or counterweights. Note only one pair of rods are included, so to use front and rear mounted accessories you will need to source optional rods.
| Rods | |
|---|---|
| Threading | Female threading, both ends |
| Diameter | 15 mm |
| Length | 7.8" / 200 mm |
| Weight | 1.92 oz / 54.4 g |
- Novo
- Novo
