Tilta 4x4 carbon fiber matte box

by Tilta

Dostupnost: Dostupno

SKU

T-MB-T03

For Lenses with Up to 100 mm Diameter

Akcija traje do 30. 04. 2024. ili do isteka zaliha!

Regularna cijena 633,75 € * Najniža cijena u zadnjih 30 dana Akcijska cijena 538,75 € 431,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

-14%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Tilta 4x4 Carbon Fiber Matte Box
2 x 4x4 Filter Trays
Nuns Knickers
3 x Anti Reflection Inserts

Opis

The Tilta 4x4 Carbon Fiber Matte Box is a 4 x 4 matte box that features carbon fiber and aluminum construction that makes it lightweight and durable. The matte box will work with lenses up to 100 mm in diameter. It features one fixed and one rotating 4 x 4 filter stage and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes.

The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. The included anti-reflection rings protect your image by blocking stray light behind the camera bouncing off of filters in the matte box and flaring your image.

Lightweight Construction: The matte box itself is made out of carbon fiber with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts.

Swing Away Design: The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.

Top & Side Flags: The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot.

Anti-Reflection Inserts: The three included anti-reflection inserts work with lenses with an outer diameter of 72, 80, and 90 mm. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image. When you are using lenses with outer diameters other than 72, 80, and 90 mm or with lenses that have excessive focus travel it is recommended to use the cloth "nun's knickers" to prevent light leaks.

Specifikacije

Matte Box
Filter Type	4 x 4
Total Filter Stages	2
Rotating Stages	1
Degree of Rotation	360°
Materials	Carbon fiber Aluminum
Dimension L x W x H	9.9 x 6.6 x 3" (25.1 x 16.8 x 7.36 cm)
Weight	2 lb (0.91 kg)

Flag
Top Flag	Dimensions 15.13 x 4.88" (384.3 x 123.9 mm) Thickness 0.06" (1.5 mm) Weight 5 oz (141.8 g)
Side Flag	Number 2 Dimensions 9.13 x 5.13" (231.9 x 130.3 mm) Thickness 0.06" (1.5 mm) Weight 3 oz (85 g)

Povezani proizvodi