Zeapon EVO D60 Motorized Slider

The slider measures 26.4" long and features a 17.3" carriage travel length. It can be mounted in a variety of configurations, such as standard horizontal, vertical, or even upside-down on a hanging rig. The camera mounts onto the carriage using a 1/4"-20 screw, and a 1/4"-20 thread on the side provides mounting for accessories such as a monitor or extension arm.
It can support up to 11 lb when using it vertically on a tripod or surface, and it can support up to 5.5 lb when used horizontally or at extreme angles. Optional AKH1 support arms can be used to stabilize the slider when it's mounted on a tripod.

The slider features on-board controls and settings to automatically perform orbital shots without interaction. By simply setting the A and B points on the rail and setting your shot in the center of the frame, the slider can capture the perfect orbital shot of a product or subject.
The slider features a 2.5mm LANC camera shutter port to connect with the camera.

The slider features a focus handle on the end that provides a built-in magnetic return function. When orbital or pano shots aren't required, it can instantly snap back to the center of the slider without repeated locking adjustments.

The speed knob on the slider provides seamless real-time speed control, and it can also be used for speed ramping for transition shots. The knob can adjust the speed from 0.01 to 2.2" per second.

There are A and B point buttons on the slider that provide control of basic A-to-B movement and orbital shots, and advanced features such as stop-motion and time-lapse can be controlled via a smartphone app.
The maximum panning angle is 55°, and the maximum panoramic angle is 125°.

The slider is powered via the USB-C input or via a side-mounted battery that keeps clear of any controls or slider operation.