Početna
Pro audio
Mikrofonski dodaci
DPA VO4099D d:vote 4099 Clip Microphone for Drum

DPA VO4099D d:vote 4099 Clip Microphone for Drum

by DPA

Dostupnost: Isporuka 7-10 dana

SKU

DPA-VO4099D

90-Degree Mounting System for Drums, High SPL Handling, 5.5" Adjustable Gooseneck, MicroDot Connector
Includes XLR Adapter, Detachable Cable

547,50 € 438,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

DPA Microphones d:vote 4099D Clip Microphone for Drums
DC4099 Mounting Clip for Drum Rims
XLR Adapter

Opis

The d:vote 4099D Clip Microphone for Drums from DPA Microphones is designed to be used as a clip mic for drums and other percussion sources. It features DPA's 90-degree system that allows you to remount the clip by 90 degrees to provide a variety of mounting positions. The 5.5" gooseneck provides further positioning options.

The microphone itself is a pre-polarized condenser with a supercardioid polar pattern. It features a maximum SPL of 152dB, allowing it to be used on high-volume sources such as toms, kicks, and percussion. Its cable is detachable for easier mounting, and the microphone terminates in a MicroDot connection. An XLR adapter is included for connecting to wired systems.

Specifikacije

Transducer Type	Pre-Polarized Condenser
Polar Pattern	Supercardioid
Principle of Operation	Pressure Gradient
Frequency Range	20 Hz to 20 kHz +/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz
Sensitivity	2 mV/Pa; -54 dB Reference: 1 V/Pa (Nominal, +/- 3dB)
Equivalent Noise Level	Typ. 28 dB(A) Reference: 20 µPa (Maximum 31 dB(A)) (A-Weighted)
Signal to Noise Ratio	66 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD)	< 1 % up to 123 dB SPL peak < 1 % up to 120 dB SPL RMS sine
Dynamic Range	95 dB
Maximum SPL	152 dB (Peak Before Clipping)
Output Impedance	MicroDot: 30 to 40 Ω XLR: 100 Ω
Cable Drive Capability	XLR: 984' (300 m)
Output Balance Principle	Signal balanced with XLR adapter
CMRR	XLR Adapter: >60 dB at 50 Hz to 15 kHz
Power Supply	Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems 48 V phantom power ±4 V with XLR adapter
Current Consumption	MicroDot: 1.5 mA XLR Adapter: 3.5 mA
Connector	MicroDot XLR Adapter Included
Polarity	Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature	-40° to 113°F (-40° to 45°C)
Relative Humidity	Up to 90%
Cable Length	6' (1.8 m)
Gooseneck	Length: 5.5" (140 mm)
Capsule Diameter	0.2" (5.4 mm)
Microphone Length	1.8" (45 mm)

Packaging Info
Package Weight	1.15 lb
Box Dimensions (LxWxH)	9.8 x 5.9 x 3.0"