- Početna
- Video i foto oprema
- Optički filteri i oprema
- NiSi 75mm System M75 Adapter Ring 72mm
NiSi 75mm System M75 Adapter Ring 72mm
by NisiCompatible with NiSi M75 holder
Adaptor can also be used as a normal 67mm step down ring
Mount it on your lens and you can use the M75 holder
Slim design, no vignetting
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Nisi M75 Adapter Ring 72mm
These rings allow you to adapt the 67mm main ring included in the NiSi M75 Holder with lenses having a frontal thread from 39 to 67mm. The adapters can also be used as 67mm step-up rings, for example to use 67mm circular filters on other lenses. Choose the size, from 39mm up to 67mm*.
There is no need to over-tighten the ring. As soon as you feel resistance the ring is secured.
*Compatibility
NiSi M75 is suitable for lenses with front thread up to 67mm.
For larger thread lenses the M75 system may be used up to 72mm thread in these conditions:
with NiSi 72mm ring without the polariser (available here selecting 72mm as size)
keeping the use of polariser with a FOV no wider than 40mm approx (m4/3), and Fuji 50-150. A step-down ring 72-67mm is required, with a 67-67mm extender ring, both available from third parties
to keep the use of polariser with other systems please use the max 72mm thread and min 40mm FOV as a guide
Please note: step-down rings are not included.
The system will fit all 67mm thread lenses without additional rings, the main adaptor has a 67mm thread.
Third-party rings can be also used to enable the system to fit smaller lens threads such as 38mm.