- Početna
- Pro audio
- Oprema za bežične setove
- Sennheiser CHG 2N EU
Sennheiser CHG 2N EU
by SennheiserCharges SL Bodypack DW Transmitter
Charges SL Handheld DW Transmitter
Network-Controlled via Control Cockpit
4 LEDs for Charging Status
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- Sennheiser CHG 2N 2-Bay Network-Enabled Charger for Speechline Digital Wireless
- NT 12-50CS AC Adapter with Mains Cable
The Sennheiser CHG 2N is a network-enabled charger with two separate charging slots. These ports can be used to charge Accupacks while inside a SpeechLine SL Bodypack DW or SL Handheld DW wireless transmitter.
Four LEDs on each charging slot indicate the current charging status. In power-saving mode, the transmitters are charged only once. The charger also does not provide any trickle charge.
You can connect the CHG 2N charger to a network using a router or switch. This allows you to monitor and control the Accupack's charge level using the Sennheiser Control Cockpit software and to modify the CHG 2N charger's network configuration. Support of remote pairing via Control Cockpit is also available. A location name of up to 400 bytes can be stored via SSC command. The versatile network interface is compatible with IPv4 and IPv6 for seamless integration.
| Compatibility | Sennheiser SpeechLine Digital Wireless |
| Power Source | AC Adapter with Power Brick (Included) |
| AC Input Power | Not Specified by Manufacturer |
| DC Input Power | 12 VDC at 1.2 A |
| Maximum Power Output | Not Specified by Manufacturer |
| Power Connectors | Not Specified by Manufacturer |
| Center Tip Polarity | Not Specified by Manufacturer |
| Mounting | 1 x Tabletop |
| Dimensions | 5.5 x 3.9 x 4" / 140 x 100 x 102 mm |
| Weight | 1.3 lb / 609 g |

















