The brightest, most durable 17” monitor in the world.
4.536,00 €3.628,80 €
Plaćanje na ratePlaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostavaZa sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnjaEU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
See beyond the restricted color and contrast of conventional monitoring with the SmallHD 1703 HDR 17" Production Monitor. Featuring HDR preview backed by a 8-bit Color Intelligence engine with calibration capabilities, the 1703 can display a large brightness range, encompassing log formats and other expanded-range picture styles. The 1000 cd/m², daylight-viewable, 1920x1080 Full HD resolution display panel can be driven by one of two SDI inputs or an HDMI input. Each input has a loop output for connecting other gear in-line without the need for a splitter. All functionality of this monitor is accessed via the innovative Page Builder OS. By implementing full aluminum construction and the provision for separately available user-replaceable polycarbonate screen protectors, SmallHD built this monitor to survive the rigors of production in studios and in the field.
Page Builder OS
Originally featured in the 500 and 700-series models, and extrapolated for the Production Monitor series, the Page Builder OS is an intuitive graphical user interface (GUI) that puts all of the advanced functionality of the 1703 at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveforms, vectorscopes, multiview, and focusing aids to up to 4 different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.
ColorFlow 3D LUT Processing
In order to keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Side-by-side preview can also be used with the HDR preview function. Separate LUT-treated images can be sent downstream over SDI and HDMI so you can have the 1703 display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image-capture function saves a still frame from the incoming video stream onto an SD card and also records the applied 3D LUT for post-production reference.
Color Intelligence Engine
When a separately available color probe is connected to the monitor via USB, the SmallHD 1703 can automatically adjust a 8-bit 3D calibration LUT for maintaining accurate color reproduction over the life of the monitor.
RapidRail Shoe-Mount System
Quickly secure and detach accessories such as wireless units to the rear of the monitor using standard shoe-mount rails. This saves time over traditional screw-mounted methods and keeps your setup clean and neat. If required these accessories can be powered straight off the monitor using the integrated 12V LEMO power output or the 3 USB ports.
Power Options
Separately available V-mount or Gold-mount battery plates can be attached to the rear of the display. A mounted battery can power the monitor as well as attached accessories through the 12V LEMO connection. The USB ports on the rear of the monitor can also power accessories with a maximum draw of 0.5 amps per port.
No Audio output (for initial firmware release) to be supported at a later release
Connector Type
SDI
2x 3G Inputs, 2x 3G Outputs
HDMI
1x Input, 1x Output
Component
Not Supported
Composite
Not Supported
Audio
1x Headphone Jack on Front of Monitor
Power Out
1x AC Power Input -3 Prong 90-260V, 1x XLR 4pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max
USB
1x Front USB2, 2x Rear USB2
Controls
Primary Control Interface
Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: LUT Selection; Backlight Level; Input Switch; Settings Menu; Multi View; Page 14 Instant Selection; Tools Menu
Record/Capture
Dedicated Capture Button on Front Bezel
Data I/O
Storage
SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades
Power
Connector Type
3Pin Grounded AC 120/240V IN, Dual XLR 1234VDC IN for Batteries, 12V Lemo 2pin OUT 4A Max
Voltage
DC Operating Voltage Range: 12-34 VDC AC Operating Voltage Range: 90 - 240 VAC
Battery Types
Gold Mount / VMount via 4pin XLR Connector
Environmental
Compliance
FCC, IC, CE, RoHS
Operating Temperature
32F 100F
Storage Temperature
4F-120F
Screen Protection
Acrylic Screen Protector Available as an Option
Height
11.5" (29.21cm)
Width
17.5" (44.45cm)
Depth/Length
2.5" (6.35cm)
Weight (Item Only without battery)
12.0625lb (5.47kg)
Weight (Packaged)
16.86lb (7.65kg)
Mount Points
Multiple ¼”-20 & ⅜”-16 Threads on Top, Bottom, Left & Right Sides. Cold Shoe Style Rails on Back of Monitor. Available Cheeseplate for Battery Bracket Mounting. Available Rapid Rail Mount interfaces with cold shoe slots for 2 additional ¼”-20 threads.
Software
Pixel Zoom (type)
2x & 4x Zoom with smooth pan via joystick
Frame Guides
Yes: Preset Aspect Ratios & Customizable
DSLR Scale
Canon 5DMkii & Canon 7D
Custom Scale
Yes (Underscan Only)
Anamorphic De-Squeeze
Yes: 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic)
Yes Automatic
Image Flip (Manual/Automatic)
Yes Automatic
Cross Conversion
Yes: HDMI → SDI & SDI → HDMI
Focus Assist (Colors)
Yes User Adjustable Color and Intensity
Peaking
Yes User Adjustable Intensity
False Color
Yes Rainbow & Arri Style
Zebra
Yes Dual User Configurable
Waveform
Yes Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Vectorscope
Yes
RGB Parade
Yes Fully User Customizable
Histogram
Yes Luma & RGB Style
Image Capture
Yes With Dedicated Button
Custom LUTS
Yes Loadable by Page or as Systemwide Color Calibration
LUT Downstream
Yes Available on SDI 1 or HDMI Out
LUT Import
via SD Card
Image Overlay
Yes with Intensity Slider and Blink Setting
Firmware
Compatible with 1700 Series Firmware V3.0 and Later
