Zoom F8n Pro

by Zoom

Dostupnost: Dostupno

SKU

10009746

32-bit float recording technology
8-channel/10-track field audio recorder/mixer
Records in BWF-compliant WAV format up to 192kHz/32-bit float
8 discrete inputs with locking Neutrik XLR/TRS combo connectors
High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN
Switchable +4dB inputs with mic/line options for both XLR and TRS

1.182,00 € 945,60 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Zoom F8n 8-Input / 10-Track Multitrack Field Recorder
AD-19 12V Power Adapter
Set of Download Codes for Cubase LE and WaveLab LE

Opis

DISPLAY

The F8n Pro's 2.4-inch full-color backlit display with monochromatic mode makes field work equally easy in low or direct lighting.

SLATE SWITCH

The F8n Pro's has a built-in slate mic for recording comments as well as the ability to output a variable frequency tone signal.

TRANSPORT CONTROLS

The control panel features stop, search forward and search backward keys as well as illuminated play/pause and record buttons.

INPUT CONTROLS

Each input features a built-in preamp with a dedicated gain control knob and a 6-segment LED level meter.

USB PORT

A USB port enables firmware updates, file transfer, and allows the F8n Pro to be used as an 8-in/4-out USB audio interface operating at sample rates up to 32-bit float / 96kHz.

INPUTS

The F8n Pro provides 8 discrete inputs with locking Neutrik XLR/TRS combo connectors, allowing you to plug in any microphone, wireless pack, or line level device. Any input can also be used as a camera return.

SD CARD SLOTS

Record on two SD/SDHC/SDXC cards, up to 1 TB each, simultaneously, allowing you to instantly backup or split recordings.

HEADPHONE JACK

The unit’s 1/4" headphone jack also comes with dedicated volume control.

MAIN OUTPUTS

The F8n Pro provides four outputs: two Main Outs (on balanced TA3 mini-XLR jacks) for connection to external mixers and processing devices; and two Sub Outs (on a single unbalanced 1/8" stereo mini-jack) for connection to a camera. The F8n Pro also provides a selectable +4 dBu output.

DC POWER

The F8n Pro can be powered by a 9-18V external DC power supply.

TIME CODE IN/OUT

Timecode can be generated internally or transmitted from an external timecode generator.

10-PIN MIC CONNECTOR

Our proprietary 10-pin connector enables the use of interchangeable Zoom mic capsules, with optional extension cables that allow for remote positioning

Specifikacije

INPUTS

INPUT 1 - 8	Connectors:	XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
INPUT SOURCE SET TO MIC (→ SETTING THE INPUT SOURCE (INPUT SOURCE))	Input gain:	+10 – +75 dB
	Input impedance:	3 kΩ or more
	Maximum input level:	+4 dBu (at 0 dBFS)
	Phantom power:	+24/+48 V, 10 mA maximum per channel
EQUIVALENT INPUT NOISE		−127 dBu or less (A-weighted, +75 dB input gain, 150 Ω input)
FREQUENCY RESPONSE		20 Hz – 60 kHz, +0.5 dB/−1 kHz (192 kHz sample rate)
A/D DYNAMIC RANGE		113 dB typ. (−60 dBFS input, A-weighted)
CROSSTALK		−90 dB or less (between adjacent channels, 1 kHz)
MIC IN		ZOOM mic capsule input (use disables Inputs 1/2)
SLATE MIC		Built-in mic for voice memos can be assigned to tracks freely

OUTPUTS

MAIN OUT 1/2	Connectors:	TA3 connectors (balanced output, 2: hot)
	Output impedance:	150 Ω or less
	Reference output level:	−10 dBV (normal output level)
		+4 dBu (line output level)
		1 kHz, 600 Ω load
	Maximum output level:	+10 dBV (normal output level)
		+24 dBu (line output level)
		1 kHz, 600 Ω load
SUB OUT 1/2	Connectors:	3.5 mm stereo mini (unbalanced output)
	Output impedance:	100 Ω or less
	Reference output level:	−10 dBV (normal output level)
		−40 dBu (mic output level)
		1 kHz, 10 kΩ load
	Maximum output level:	+10 dBV (normal output level)
HEADPHONE	Connector:	1/4 inch stereo (unbalanced output)
	Output impedance:	18 Ω or less
	Maximum output level:	100 mW + 100 mW (32 Ω load)
D/A DYNAMIC RANGE		105 dB typ. (−60dBFS input, A-weighted)

RECORDING MEDIA

	Dual SD card slots:	SDHC cards: 4 GB – 32 GB
		SDXC cards: 64 GB – 1 TB

RECORDING FORMATS

WHEN WAV SELECTED	Supported formats:	44.1, 47.952, 48, 48.048, 88.2, 96 and 192 kHz
		16-bit linear, 24-bit linear and 32-bit float
		Mono/stereo/2-10 ch poly
		BWF and iXML
	Maximum simultaneous recording tracks:	10 (8 inputs + stereo mix)
		8 (at 192 kHz sampling rate)
WHEN MP3 SELECTED	Supported formats:	128, 192 and 320 kbps
		44.1 and 48 kHz
		ID3v1 tags
	Maximum simultaneous recording tracks:	2

RECORDING TIME

	Using a 32GB card:	23:08:00 (48 kHz/32-bit float stereo WAV)
		5:47:00 (192 kHz/32-bit float stereo WAV)

TIMECODE

	Connector:	BNC
	Modes:	Off, Int Free Run, Int Record Run, Int RTC Run, Ext and Ext Auto Rec (audio clock can be synchronized to timecode)
	Frame rates:	23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND and 30D
	Precision:	±0.2 ppm
	Supported input levels:	0.2 - 5.0 Vpp
	Input impedance:	4.6 kΩ
	Output level:	3.3 Vpp
	Output impedance:	50 Ω or less

POWER SUPPLIES

	AA batteries:	8 (alkaline, nickel-metal hydride or lithium)
	AC adapter:	ZOOM AD-19, DC 12 V/2 A, center plus
	External DC power supply:	HIROSE HR10A-7R-4S 4-pin connector (1 pin: -, 4 pin: +), 9–18 V

ESTIMATED CONTINUOUS RECORDING TIMES:

• THESE VALUES ARE ONLY ESTIMATES.	2 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF	Alkaline batteries: about 6 hours
• THESE VALUES ARE BASED ON IN-HOUSE TESTING METHODS.		NiMH batteries (2500 mAh): about 8.5 hours
• THEY WILL VARY GREATLY ACCORDING TO USE CONDITIONS.		Lithium batteries: about 12 hours
	8 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32Ω headphones, PHANTOM OFF	Alkaline batteries: about 5 hours
		NiMH batteries (2500 mAh): about 7 hours
		Lithium batteries: about 10 hours
	8 channels to SD 1/2 192kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT ON, TIMECODE Int Free Run, LED/LCD brightness 60, 32Ω headphones, PHANTOM 48 V	Alkaline batteries: about 0.5 hours
		NiMH batteries (2500 mAh): about 1.5 hours
		Lithium batteries: about 2.5 hours

DISPLAY

2.4 inch full-color LCD (320 × 240)

USB

	Connector:	Mini-B
		• Use a USB cable that supports data transfer.
		• USB bus power operation is not supported.
MASS STORAGE OPERATION	Class:	USB 2.0 High Speed
MULTI TRACK AUDIO INTERFACE MODE OPERATION (DRIVER REQUIRED FOR WINDOWS, NOT REQUIRED FOR MAC)	Class:	USB 2.0 High Speed
	Specifications:	Sampling rate: 44.1/48/88.2/96 kHz
		Bit depth: 24-bit linear/32-bit float
		8-in/4-out
STEREO MIX AUDIO INTERFACE MODE OPERATION (NO DRIVER REQUIRED) • SUPPORTS AUDIO INTERFACE OPERATION WITH IOS/IPADOS DEVICES	Class:	USB 2.0 Full Speed
	Specifications:	Sampling rate: 44.1/48 kHz
		Bit depth: 16-bit linear
		2-in/2-out
AUDIO INTERFACE OPERATION WITH RECORDING (DRIVER REQUIRED FOR WINDOWS, NOT REQUIRED FOR MAC)	Class:	USB 2.0 High Speed
	Specifications:	Sampling rate: 44.1/48 kHz
		Bit depth: 24-bit linear/32-bit float
		10-in/4-out

POWER CONSUMPTION:		15 W
EXTERNAL DIMENSIONS:		7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H)
WEIGHT: (INCLUDING BATTERIES)		1200 g
NOTE: 0 DBU = 0.775 VRMS