- Početna
- Pro video
- Video mikseri
- AVMATRIX TS3019-6 Tally Sytem 1 box+6 lamps
AVMATRIX TS3019-6 Tally Sytem 1 box+6 lamps
by Avmatrix- 1 x Tally Box, 6 x Tally Lamps
- 2' Wireless Transmission
- GPIO, USB, RS-232/485 Interfaces
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- AVMATRIX Wireless Multi-Camera Tally Light System (6 x Tally Lamps)
- Tally Box
- 6 x Tally Lamp
- Power Adapter
- Antenna
- GPIO Connector
- 5 x USB Type-C Cable
- Carrying Case
Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with six tally lamps. The system can wirelessly communicate from up to 656.2' away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal.
Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories.
Connectivity
- Supports 433 MHz wireless or wired tally connection
- Up to 656.2' line-of-sight wireless connection distance
Tally Box
- GPIO, USB Type-C, RS-485, and RS-232 interfaces
- 1-pin antenna input
- GPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxes
- PTZ remote control via RS-232/RS-485 pass through
- USB Type-C input compatible with vMix software
- Can support up to 16 tally lamps
Tally Lamp
- PTZ camera connection via RS-485 input
- Front and rear indicators with four-level brightness adjustment
- Signal strength and battery status indicators
- Powered via USB Type-C input or with separately available 18650 lithium-ion battery
- 1/4"-20 thread for installation of hot shoe
AVMATRIX TS3019 Specs
Inputs / Outputs
USB I/O |
7 x USB-C Female Input |
Control I/O |
1 x DB-9, RS-232 Input (Tally Box) |
Wireless
Wi-Fi |
Yes |
Power
Power Source |
USB (Included), Battery |
Battery Type |
1 x 18650 Lithium-Ion |
DC Input Power |
5 VDC at 1 A |
Power Consumption |
0.2 W |
Environmental
Operating Temperature |
-4 to 140°F / -20 to 60°C |
Storage Temperature |
-22 to 158°F / -30 to 70°C |
Physical
Mounting |
Bottom: 6 x 1/4"-20 Thread |
Dimensions |
4.1 x 3 x 1" / 104 x 75.5 x 24.5 mm (Tally Box) |
Weight |
11.5 oz / 327 g (Tally Box) |
Packaging Info
Package Weight |
3.59 lb |
Box Dimensions (LxWxH) |
13.2 x 8.9 x 3.4" |