Početna
Pro video
Dodatna oprema
Blackmagic Design GPI and Tally Interface

Blackmagic Design GPI and Tally Interface

Dostupnost: Isporuka 7-10 dana

SKU

SWTALGPI8

Blackmagic Design GPI & Tally Interface for ATEM Production Switchers is designed to display tallies to indicate the on-air status of video signals.

611,25 €/4.605,46kn 489,00 €/3.684,37kn

Tečaj konverzije: 1 EUR = 7,53450 HRK

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Blackmagic Design GPI & Tally Interface for ATEM Production Switchers
12 V Power Supply

Opis

The Blackmagic Design GPI & Tally Interface for ATEM Production Switchers is designed to display tallies to indicate the on-air status of video signals. It features 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers for operation. Additionally, the GPI & Tally Interface can be used with multiple interfaces to increase the number of inputs and outputs.

Displays tallies for indicating the on-air status of video signals
8 contact closure inputs & 8 contact closure outputs
Compatible with ATEM switchers and Videohub routers
Connect to multiple interfaces offering enhance flexibility in operation

Specifikacije

Connections
Contact Closure	25 pin D-type connector providing 8 up to isolated inputs and 8 relay contact closure outputs
Inputs	Optical isolators triggered by connection to ground (maximum 5 V @ 14 mA)
Outputs	Mechanical relay contact closure to ground (maximum 30 V @ 1 A)
Ethernet	10 / 100 BaseT with loop through for connecting to other Ethernet enabled equipment
Computer Interface	1 x USB 2.0 high speed interface for configuration and firmware updates