DJI Matrice 400 2510F Propeller
by DJI
Dostupnost:
Isporuka 14-20 dana
SKU
DJI Matrice 400 2510F Propeller
DJI Matrice 400 2510F Propellers (Pair) are the factory-matched, high-thrust rotors for the Matrice 400 platform.
43,00 €
34,40 €
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- 1x Clockwise 2510F Propeller
- 1x Counter-Clockwise 2510F Propeller
- 6x Propeller Mounting Screws
DJI Matrice 400 2510F Propellers (Pair) are the factory-matched, high-thrust rotors for the Matrice 400 platform. The carbon-fiber composite 25 × 10-inch blades fold for transport yet lock rigid under load, delivering stable lift for the M400’s 59-minute endurance and 6 kg payload ceiling while maintaining IP55 environmental sealing.
Tips:
- 2510F propellers are exclusive to the Matrice 400 Series. Do not mix with other prop models.
- Inspect blades before every flight; replace immediately if chipped, cracked, or warped.
- Always use new screws when replacing propellers and apply medium-strength thread-locker.
- Tighten screws to the torque spec listed in the M400 user manual to avoid imbalance or motor damage.
Compatibility:
- DJI Matrice 400 Series
| Dimensions: | 63.5 cm diameter, 25 cm pitch (25 × 10 in) |
| Material: | Carbon-fiber reinforced polymer, foldable hub |
| Weight (single blade): | ≈ 176 g |
| Operating Temp: | –4 °F – 122 °F (–20 °C – 50 °C) |
Izdvojeni proizvodi
