Neumann AK 50

by Neumann

Dostupnost: Isporuka 7-10 dana

SKU

SEN-069016

Neumann AK 50 - Hypercardioid Miniature Capsule for KM 100 and KM 100F Power Supplies

856,25 € 685,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

1 x Neumann AK 50

Opis

The Neumann AK 50 microphone capsule is part of the KM 100 miniature series microphone systems. The AK 50 microphone element features a pressure gradient, single diaphragm transducer with a hyper-cardioid polar pattern.

The hyper-cardioid polar pattern is highly effective in reducing off-axis ambiance and noise. Attenuation of sound from the side or rear is about 10dB with the least sensitivity at an angle of 120 degrees. This allows the element to be used in recording and sound reinforcement applications, in front of stage.

Modular Design: The capsule is developed for use with the KM100 and KM100F modular power supplies.

Hyper-Cardioid Polar Pattern: The AK 50 element features a hyper-cardioid pick up pattern which is effective in minimizing room ambiance, monitor noise and other off-axis signal.

Specifikacije

Transducer	Pressure Gradient Condenser
Polar Pattern	Hypercardioid
Frequency Response	20 Hz - 20 kHz
Dynamic Range (Typical)	121 dB
Signal-to-Noise Ratio	68 dB, Related at 1 Pa at 1 kHz (CCIR dB) 77 dB, Related at 1 Pa at 1 kHz (A-Weighted dB)
Maximum Input Sound Level	138 dB Less than 0.5% THD (without Preattenuation) 148 dB Less than 0.5% THD (with Preattenuation)
Power Requirements	Phantom +48v (KSM 100 Power Supply)
Output Impedance	50 Ohms
Output Connectors	XLR-3 Type (KSM 100 Power Supply)
Pad	Yes, -10 dB Preattenuation
Low Frequency Roll-Off	Use KSM 100F Power Supply
Dimensions (LxDiameter)	3.68 x 0.88" (92 x 22mm)
Weight	2.82 oz. (80 g)