- Početna
- Pro audio
- Bubica (Lavalier) mikrofoni
- Sennheiser MKE 1-4-3
Sennheiser MKE 1-4-3
by Sennheiser- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- 1 MKE 1 clip-on microphone
- 1 MZC 1-1 small frequency response cap
- 1 MZC 1-2 large frequency response cap
- 3 make-up protection caps
Our smallest Sound Pro. Whether for musicals,live shows or broadcasting applications, the MKE 1 - Sennheiser's smallest clip-on microphone - performs at its best in all situations in which a microphone needs to be virtually invisible and still offer outstanding sound quality.
Featuring a newly developed, moisture-resistant protective membrane, the MKE 1 stands up better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose cap offer additional protection from moisture so that it only picks up what it is meant to pick up - perfect sound. The ultra-thin, heavy-duty cable with molded anti-kink sleeve minimizes handling noise and makes this a microphone you can rely upon completely.
Features
-
Great strengths - small microphone
-
Very small dimensions (3.3 mm capsule diameter)
-
High maximum sound pressure level (142 dB)
-
Very high speech intelligibility; clear, pleasant treble
-
Full, natural sound with low ambient noise
-
Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
-
Very sweat-resistant due to protective membrane
-
Flexible tubes for attaching the microphone with clips or adhesive tape
Transducer | Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 20Hz to 20kHz +/- 2.5dB |
Dynamic Range (Typical) | Not Specified By Manufacturer |
Signal-to-Noise Ratio | Equivalent noise level 27dB Equivalent noise level 39dB |
Maximum Input Sound Level | 142dB |
Power Requirements | 4.5 - 15V |
Output Impedance | 1k Ohm (Nominal) 4.7k Ohm (Min. Terminating) |
Output Connectors | 3-pin Lemo |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 0.12" (3.5mm) Diameter |
Weight | 0.004 oz (0.1g) |