SmallRig Cage for Sony A6100/A6300/A6400/A6500 CCS2310
by SmallRigFor Sony Alpha a6300/a6400/a6500 Camera
Compact, Formfitting Design
1/4"-20 & 3/8"-16 Threaded Holes
ARRI Locating Holes
- Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
- Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
- Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.
Sadržaj pakiranja
- SmallRig Formfitting Cage for Sony Alpha a6300/a6400/a6500
- Allen Key
- Flat Head Screwdriver
- M2.5 Screw
Rig up your Sony Alpha a6300, a6400, or a6500 digital camera with this Formfitting Cage from SmallRig. With its full-frame design this cage protects your camera while providing numerous 1/4"-20, 3/8"-16, and ARRI locating holes for mounting accessories. You can use the cage's mounting points to customize your setup with your choice of optional accessories such as a wooden handle, monitor, microphone, light, cold shoe, cable clamp, lens adapter support, and more.
The cage connects to your camera via a 1/4"-20 screw on the bottom, and uses an M2.5 thread on the right side as a second locking point to prevent camera wiggle. There are several 3/8"-16 and 1/4"-20 threaded holes on the bottom for mounting the cage on a separately available tripod plate. An included flat head screwdriver makes for quick installation and attaches to the bottom of the cage. On the right side there are slots for attaching an optional carry strap.
| Compatibility | Sony Alpha a6300, a6400, and a6500 |
| Accessory Mounting | 1/4"-20 and 3/8"-16 Threads ARRI Locating Holes 2 x M4 Screws (Front) |
| Tripod Mounting | 3/8"-16 and 1/4"-20 Threads for Tripod Plates |
| Camera Interface | 1/4"-20 Screw (Bottom) M2.5 Thread (Side) |
| Material | Aluminum Alloy |
| Dimensions | 5.4 x 1.9 x 3.3" / 137.3 x 49.4 x 84.7 mm |
| Weight | 4.9 oz / 138 g |
- Novo
