Hollyland Syscom 421 Single RX

Dostupnost: Isporuka 7-10 dana

SKU

HO-SY421S

The Hollyland Syscom 421 1800' Wireless Video & Audio Transmission System is a multi-cam wireless video transmission system that communicates with up to four cameras using a single receiver with PTZ control as well as tally.

1.586,25 € 1.269,00 €

Plaćanje na rate Plaćajte na rate Visa, Visa Premium, Maestro, MasterCard i Diners kreditnim karticama. Naknada je 5% na objavljenu cijenu a zaračunava se u košarici prilikom odabira plaćanja. Više detalja provjerite na linku Načini plaćanja.
Brza dostava Za sve narudžbe unutar RH zaprimljene do 14h dostava će biti izvršena sljedećeg radnog dana*. Za cijelu Europu vršimo brzu dostavu, a više detalja provjerite na linku Načini dostave.
Međunarodna kupnja EU tvrtke(osim RH) s valjanim VAT ID brojem plaćaju cijenu bez PDV-a. Cijena će se obračunati prilikom check out-a. Svi kupci izvan EU plaćaju izvoznu cijenu bez PDV-a.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Sadržaj pakiranja

Hollyland Syscom 421 1800' Wireless Video & Audio Transmission System
4 x Transmitter
Receiver
25 x 5 GHz Antenna
4 x 7" Magic Arm
OTG Cable
4 x DC Conversion Cable
5 x RS485/RS422 Interface Cable
Power Adapter
Limited 1-Year Warranty

Opis

Supporting up to 1080p60 video signals via SDI and HDMI, the transmitter/receiver system offers an 1800' line-of-sight transmission range with 0.07 second latency.

The receiver features 4 x SDI/HDMI outputs (one for each transmitter) for connecting to a monitor or switcher. You can also connect the receiver to a LAN, allowing you to pass control signals from a control panel to the transmitters.

This enables you to control PTZ cameras as well as send tally information. The transmitters have a dedicated tally output port.

Both units also have an OLED display that confirms the resolution, transmission channel, signal strength, and other details such as battery power.

The transmitters each have a built-in L-series battery plate, and the receiver has a V-mount battery plate. Both Transmitter and receiver feature a 2-pin power input for extended run times.

Key Features

Up to 1080p60 transmitter/receiver system
1800' line-of-sight transmission
SDI and HDMI input
SDI and HDMI output
Passes control and tally
OLED display

Specifikacije

Wireless Range 1800' / 548.64 m (Line-of-Sight)
Channel Bandwidth 40 MHz
Frequency Range US: 5.1 to 5.9 GHz
Latency < 0.07 sec
RF Power ≤ 22 dBm
RF Sensitivity -90 dBm

Transmitter Antenna Ports 4 x RP-SMA Male
Receiver Antenna Ports 4 x RP-SMA Male
Transmitter Video Connectors

1 x BNC (3G-SDI / HD-SDI) Input
1 x HDMI Input

Receiver Video Connectors

4 x BNC (3G-SDI) Output
4 x HDMI Output

Transmitter Other I/O

1 x USB Type-C
1 x RJ45 10/100/1000 Ethernet, RS-422, RS-485
1 x 3.5 mm Tally Output

Receiver Other I/O

1 x USB Type-C
1 x RJ45 10/100/1000 Ethernet, RS-422, RS-485

Broadcast System Compatibility

NTSC, PAL
Video Format SDI/BNC:
1080p at 23.98, 24, 25, 30, 50, 60 fps
1080i at 50, 60 fps
720p at 50, 60 fps

HDMI:
1080p at 24, 25, 30, 50, 60 fps
1080i at 50, 60 fps
720p at 50, 60 fps
576p at 50 fps
480p at 60 fps

Transmitter Panel Type OLED
Receiver Panel Type OLED

Transmitter Built-In Battery None
Receiver Built-In Battery None
Transmitter Battery Support 1 x Sony L-Series / NP-F Type
Receiver Battery Support 1 x V-Mount
Transmitter Power Connector 1 x 2-Pin LEMO (7 to 36 VDC) Input
Receiver Power Connector 1 x 2-Pin LEMO (18 to 36 VDC) Input
Transmitter Power Consumption Device: (12 W)
Receiver Power Consumption Device: (32 W)

Transmitter Mounting 1 x 1/4"-20 Female
Receiver Mounting 1 x 1/4"-20 Female
Memory Card Slot Not Specified by Manufacturer
Transmitter Dimensions 5.67 x 3.46 x 1.18" / 144 x 88 x 30 mm (Excluding Antenna and Battery Plate)
Receiver Dimensions 9.53 x 5.83 x 2.44" / 242 x 148 x 62 mm (Excluding Antenna and Battery Plate)
Transmitter Weight 0.9 lb / 431.5 g (Excluding Antenna)
Receiver Weight 3.6 lb / 1621 g (Excluding Antenna)