Litepanels Sola 4+ Daylight Fresnel

by Litepanels
Dostupnost: Isporuka 14-20 dana
SKU
906-4024

Daylight-Balanced 4.0" LED Fresnel
Beam Control of 15 to 71°
575W HMI Equivalent
High-Powered Performance

1.519,75 € 1.215,80 €

Sadržaj pakiranja

Bundle Items
4-Way Barndoors for Sola 4
1 Year Manufacturer's Warranty
Yoke Kit for Sola 4 and Inca 4
Sola 4 AC/DC Power Supply (100-240V)
1 Year Manufacturer's Warranty

Also Includes
Limited 1-Year Warranty
Limited 1-Year Warranty Extension to 2-Years Total After Online Registration

The Litepanels Sola 4+ LED Fresnel Light builds on the solid foundation of the Sola 4 but this time with much more power. Features include thermal management through advanced hardware and software and an enhanced 5600K LED source based on the phosphor mix research that brought us the Sola 12. These changes directly affect color fidelity, garner high CRI ratings, and extend the life of the fixture.
At 15 to 71°, the 4" Fresnel has an impressively wide range of spot-to-flood adjustment and an output comparable to a 575 W HMI fixture, while drawing only 53W of power. It's also barely warm to the touch, eliminating of potential heat damage and talent discomfort. Low power consumption also means reduced HVAC costs in the studio that helps provide a rapid return of investment.

Control is at the heart of the Sola 4+ design. Dimming from 100-0% can be done locally or remotely from an optional console with DMX. The Sola 4+ runs on 120-240 VAC mains power for worldwide use but can also run on optional 14-28 VDC battery sources. The lack of an external ballast trims down the fixture's form factor and allows it to weigh in at just 3.6 lb. Four-way barndoors are included for even greater control of the Sola 4+'s beam spread. If previous generations caught your eye, now is the time to check out the Sola 4+.

4-Way Barndoors for Sola 4
This Litepanels 4-Way Barndoors for Sola 4 Fresnel fits into the Sola's filter slots and rotates 360°. The lightweight, matte black metal leaves fold inward or outward to control or block off areas of the light beam.


Yoke Kit for Sola 4 and Inca 4
This Litepanels Yoke Kit for Sola 4 and Inca 4 is a replacement fot the yoke that ships with the Sola 4 and Inca 4. The kit does not include knobs, which are available for separate purchase.


Sola 4 AC/DC Power Supply (100-240V)
This Litepanels Sola 4 AC/DC Power Supply (100-240V) ensures that you can use the Sola 4 LED Fresnel virtually anywhere in the world. A power cord to match your electrical source is required and not included.

Colour Temperature:   Daylight
Beam Angle:   15 degrees to 71 degrees
Fresnel Lens:   4 inches / 10.16 cm
CRI/TLCI:   95
Size:   8 x 7 x 11 inches/ 21 x 18 x 28 cm
Weight:   3.60 lbs/ 1.63 kg
Max Power Draw:   53 W
Power Supply:   14-28 VDC / 100-240 VAC DC power via 4 pin XLR
DMX:   Included DMX512 protocol via RJ45